Personal care

How to use the cup

• Wash your hands. Fold the cup (e.g. U-fold).
• Insert in a comfortable position and release so that the rim can unfold completely.
• Check for a vacuum by running a finger around the rim.
• Empty as needed. For heavy flow, typically 2–3 times a day; for light days, it can be worn for up to 10–12 hours.

Cleaning & storage

• Rinse with warm water after each emptying.
• For a safe start to the cycle: boil for 2–5 minutes.
• Avoid aggressive agents (e.g. chlorine) as they can damage the silicone.
• After the cycle: wash thoroughly, dry and store in a cotton bag – not in plastic.
• Colour change over time is normal and does not affect function.
• Cleaning powder can be used as directed for thorough cleaning.

If the cup leaks or is difficult to remove

• Leaks are most often caused by the cup not being fully unfolded or sitting too high. Try a different fold, adjust the position or choose a different size.
• When removing: relax your pelvic floor, gently squeeze the base to break the vacuum, and slowly pull out.

Safety

• Always wash your hands before insertion/removal.
• Not a contraceptive. Remove the cup before sexual intercourse.
• If you experience symptoms consistent with Toxic Shock Syndrome (e.g. sudden fever, rash, vomiting, diarrhoea, dizziness), remove the cup immediately and contact a doctor.
• Keep out of reach of children and pets.

Daily cleaning after use

• Boil approx. 300 ml of water in a small saucepan.
• Add 1 teaspoon of powder.
• Immerse the cup and leave it in the boiling solution for a few minutes.

Important: Make sure that the water does not boil away completely – direct contact between a dry, hot saucepan and the cup can permanently damage the silicone.

Deep cleaning + stain removal

• Boil approx. 300 ml of water, remove the saucepan from the heat.
• Add 1 tablespoon of powder.
• Place the cup in the solution for several hours or overnight to remove discolouration/older stains.

Contents

• Net weight: 200 g
• Ingredients: approx. 30% sodium percarbonate, > 30% sodium hydrogen carbonate

Store in a dry place out of reach of children.

How do you use a Safety Razor?
If you haven't tried a safety razor - or a DE scraper like this one, then you probably just have to get used to using it. And your skin probably needs to too.

But follow this procedure - and you're pretty much on your way:
 

• Moisten skin and beard/hair with warm water
• Use shaving foam or a shaving brush and lather it up well - possibly. with a brush
• Check your scraper and make sure the scraper head and handle are not loose. However, only tighten the screw if it is loose. Then you are sure that the blade is at the right angle
• Start your shave and hold the scraper at a 30 degree angle to the skin
• Let the scraper slide over the skin with light pressure
• Shave only in the direction of the hairs - not against the hairs
• Tighten the skin in places where it can be difficult to get a flat surface - e.g. on the neck

Can a Safety Razor also be used by women?
The short answer is: YES!

The Safety Razor also works well for shaving on the body.

Even though Mühle's leaflet says that it should only be used on the face. But Mühle's products are sold all over the world, so they have probably chosen to be extra careful with their recommendations for that reason. As long as you are careful with the shave, just as you would be if it were on the face, then you can easily use it on the body too.

See our big guide on Safety Razors just here.

How to use a DE safety razor

• Soften the hairs with warm water.
• Lather up with shaving soap or gel.
• Maintain an angle of about 30° and use very light pressure – let the weight do the work.
• Start in the direction of the hair; rinse frequently.
• If necessary, take an extra light pass across.
• Rinse and dry the razor after use.
• Replace the blade regularly for best results.

Compatibility
The razor fits all standard DE razor blades.

Replacing blades
Replace the razor blade after every 5-10 shaves for optimal sharpness and comfort. Extend the life of the razor by drying the razor and blade in a towel after use.

Materials

• Briefs: 92% organic cotton, 8% elastane
• Gusset, skin layer: 50% organic cotton, 50% TENCEL™ micromodal
• Gusset, absorbent layer: 55% hemp, 45% organic cotton
• Gusset, membrane: 100% PUL

Care

• Wash 1-3 times before first use for best absorption
• Rinse cold after wear until water runs clear
• Machine wash 30 °C with regular laundry
• Air-dry (no pegs/tumble dryer)
• No bleach or ironing (heat damages the membrane)

Materials

• Briefs: 92% organic cotton, 8% elastane
• Gusset, skin layer: 50% organic cotton, 50% TENCEL™ micromodal
• Gusset, absorbent layer: 55% hemp, 45% organic cotton
• Gusset, membrane: 100% PUL

Care

• Wash 1-3 times before first use for best absorption
• Rinse cold after wear until water runs clear
• Machine wash 30 °C with regular laundry
• Air-dry (no pegs/tumble dryer)
• No bleach or ironing (heat damages the membrane)

Materials

• Briefs: 92% organic cotton, 8% elastane
• Gusset, skin layer: 50% organic cotton, 50% TENCEL™ micromodal
• Gusset, absorbent layer: 55% hemp, 45% organic cotton
• Gusset, membrane: 100% PUL

Care

• Wash 1-3 times before first use for best absorption
• Rinse cold after wear until water runs clear
• Machine wash 30 °C with regular laundry
• Air-dry (no pegs/tumble dryer)
• No bleach or ironing (heat damages the membrane)

Materials

• Briefs: 92% organic cotton, 8% elastane
• Gusset, skin layer: 50% organic cotton, 50% TENCEL™ micromodal
• Gusset, membrane: 100% PUL

Care

• Wash 1-3 times before first use for best absorption
• Rinse cold after wear until water runs clear
• Machine wash 30 °C with regular laundry
• Air-dry (no pegs/tumble dryer)
• No bleach or ironing (heat damages the membrane)

Materials

• Briefs: 92% organic cotton, 8% elastane
• Gusset, skin layer: 50% organic cotton, 50% TENCEL™ micromodal
• Gusset, membrane: 100% PUL

Care

• Wash 1-3 times before first use for best absorption
• Rinse cold after wear until water runs clear
• Machine wash 30 °C with regular laundry
• Air-dry (no pegs/tumble dryer)
• No bleach or ironing (heat damages the membrane)

A new type of Anti-Age serum
Throughout life - and the changes we and our bodies undergo - the needs of the skin evolve continually. In our younger years, hormonal shifts typically cause spots and blemishes; for some adults this persists, but for most it subsides and is replaced by new challenges.

A central reason the skin’s needs change over time is that the body’s ability to regenerate gradually decreases with age. In the skin, the body’s largest organ, this leaves visible traces. The most common signs of ageing skin are dryness, reduced elasticity, wrinkles and fine lines, pigmentation spots, dry skin, and loss of glow.

In traditional skincare, “Anti-Age” is used to describe rejuvenating treatment for ageing skin. At NaturligOlie, however, they find the term unfortunate, as it can trigger negative thoughts about processes that inevitably accompany getting older. They have therefore chosen another, more appreciative path and call it “Pro-Age” - an approach that celebrates caring for ageing skin.

For them, Pro-Age means meeting the new skincare needs that arise with age - with active ingredients that support the skin’s changing needs and its diminished regenerative ability over time. The goal of NaturligOlie’s Pro-Age Serum is to equip you to care for, not fight, the new needs your skin develops as time passes.

Who is this Pro-Age Serum for?
Those with mature, dry, normal or sensitive skin - including anyone prone to an uneven tone and loss of radiance.

How to use
Apply 1–2 pumps to cleansed skin morning and/or evening. Use before oil/cream. Pair with SPF during the day.

Key ingredients

• RetinART (microalgae extract): retinol-like effect; increases collagen, reduces lines/spots - gentler than retinol.
• RejuveNAD (sunflower sprout extract): raises NAD+, improves skin tone, reduces wrinkle depth.
• Hyaluronic acid: binds water, adds plumpness and suppleness.
• Organic cherry water: rich in antioxidants; stimulates collagen, elastin, and hyaluronic acid.

INCI
Prunus Cerasus Fruit Water**, Helianthus Annuus Sprout Extract*, Maltodextrin*, Aqua*, Chlorella Vulgaris Extract*, Propanediol*, Lecithin*, Lactic Acid*, Pentylene Glycol*, Sodium Hyaluronate*, Xanthan Gum*, Sodium Levulinate*, Potassium Sorbate*, Citric Acid*
100% natural* · 93.5% organic**