Glass drinking bottle

Glass water bottle from Retap

It makes it easy to make a big difference to the environment when you reuse it again and again and save lots of plastic bottles.

And at the same time you avoid hormone-disrupting substances in your drinking water.

Retap is a Danish brand, so the design is so beautifully simple and clean.

The bottle fits really well in the hand and the rounded edges make it both delicious to drink from and super hygienic.

This water bottle is sold without a lid

It holds 500 ml.

The drinking bottle is made of borosilicate glass, which is both strong and light.

The bottle measures 19 x 8 cm.

Retap's water bottle is made from up to 30% recycled glass.

Maintain your water bottle in glass

Should the glass bottle get limescale, you can use it to great advantage this extra effective limescale remover in the bottle. Preferably with a little warm water. Then the chalice is gone again.

Glass water bottle from Retap

It makes it easy to make a big difference to the environment when you reuse it again and again and save lots of plastic bottles.

And at the same time you avoid hormone-disrupting substances in your drinking water.

Retap is a Danish brand, so the design is so beautifully simple and clean.

The bottle fits really well in the hand and the rounded edges make it both delicious to drink from and super hygienic.

This water bottle is sold without a lid

It holds 800 ml.

The drinking bottle is made of borosilicate glass, which is both strong and light.

The bottle measures 23 x 8.8 cm.

Retap's water bottle is made from up to 30% recycled glass.

Maintain your water bottle in glass

Should the glass bottle get limescale, you can use it to great advantage this extra effective limescale remover in the bottle. Preferably with a little warm water. Then the chalice is gone again.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Army Green

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Dark Blue

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Practical sleeve that fits Retap bottles of 0.5 liters.

Protects the bottle from impacts and makes it easier to grip.

Retap sleeve has a practical strap that makes the bottle much easier to transport.

This retap sleeve is made of 80% cotton, 17% polyamide and 3% elastane.

It can machine wash at 40 degrees.

Sleeve measures 7.9 cm. in height and 6.6 cm. in width.

Retap the sleeve is available in several colours.

Lid for Retap glass water bottle

Lid suitable for Retap glass water bottle

Colour: Baby Blue

The lid is made of TPE thermoplastic rubber free of BPA, phthalates and PVC.

The lid fits loosely and is therefore not close enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

If you want a plastic-free Retap bottle, you have the option to purchase a wooden lid.

This lid is made of walnut wood.

The lid is hand-turned and gives your retap bottle a beautiful and stylish look.

All the lids are unique - depending on which piece of wood is used.

But walnut wood is generally warm in color and plays beautifully against it cold glasses.

Be careful that the lid does not stick as such, so it should only be used as a "decoration" at home or in the office.

On the other hand, it works very well to prevent your water from getting a "refrigerator taste" when it is in the fridge.

The lid is not dishwasher safe, but can be washed by hand with a little mild washing-up liquid.

Practical sleeve that fits Retap bottles of 0.8 liters.

Protects the bottle from impacts and makes it easier to grip.

Retap sleeve has a practical strap that makes the bottle much easier to transport.

This retap sleeve is made of 80% cotton, 17% polyamide and 3% elastane.

It can machine wash at 40 degrees.

Sleeve measures 10.4 cm. in height and 7.4 cm. in width.

Retap the sleeve is available in several colours.

Lid for Retap glass water bottle

Lid suitable for Retap glass water bottle

Colour: Black

The lid is made of TPE Thermoplastic rubber free of BPA, phthalates and PVC.

The lid fits loose and is therefore not close enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Pink

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loosely and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Petroleum Green

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

If you want a plastic-free Retap bottle, you have the option of purchasing an additional wooden lid.

This lid is made of oak.

The lid is hand-turned and gives your retap bottle a beautiful and stylish look.

All the lids are unique - depending on which piece of wood is used.

But oak is generally warm in color and contrasts beautifully with the cold glass.

Be careful that the lid does not stick as such, so it should only be used as a "decoration" at home or in the office.

On the other hand, it works very well to prevent your water from getting a "refrigerator taste" when it is in the fridge.

The lid is not dishwasher safe, but can be washed by hand with a little mild detergent.

Glass water bottle from Retap

It makes it easy to make a big difference to the environment when you reuse it again and again and save lots of plastic bottles.

And at the same time you avoid hormone-disrupting substances in your drinking water.

Retap is a Danish brand, so the design is so beautifully simple and clean.

The bottle fits really well in the hand and the rounded edges make it both delicious to drink from and super hygienic.

This water bottle is sold without a lid

It holds 300 ml.

The drinking bottle is made of borosilicate glass, which is both strong and light.

The bottle measures 15.5 x 6.3 cm.

Retap's water bottle is made from up to 30% recycled glass.

Maintain your water bottle in glass

Should the glass bottle get limescale, you can use it to great advantage this extra effective limescale remover in the bottle. Preferably with a little warm water. Then the chalice is gone again.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Mustard Yellow

The lid is made of TPE Thermoplastic rubber free of BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Purple

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Forrest Green

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Dusty Red

The lid is made of TPE Thermoplastic rubber free of BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Peach

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Rebottled whiskey glass in olive brown glass 2 pcs.

But recycling glass also costs a lot in production. In fact, up to 85% of the same amount of energy is used when producing new glass to recycle old. And at the same time, new glass must be added to the recycled before it can be used.

Dutch Rebottled has changed that. Instead of recycling the glass from old wine bottles, they upcycle it into drinking glasses and decanters. And with the most beautiful results. Because a fine story has been preserved in each individual glass and carafe and a unique expression, as it is different types of bottles that end up at Rebottled.
They cut the bottles and have them gently sharpened and adapted so that they function as the perfect drinking glasses and carafes.

At the same time, Rebottled takes a social responsibility by helping people outside or on the edge of the labor market to get started work again.

This package contains 2 whiskey glasses in olive brown glass.

Each glass can hold 230 ml
They each measure 8 x 7.5 cm and weigh 170 g.
The glasses come in a nice box made of recycled cardboard.

Note that the glasses may vary slightly in shades from the pictures.

Practical sleeve that fits Retap bottles of 0.3 liters.

Protects the bottle against impacts and makes it easier to grip.

Retap sleeve has a practical strap that makes the bottle much easier to transport.

This retap sleeve is made of 80% cotton, 17% polyamide and 3% elastane.

It can machine wash at 40 degrees.

Sleeve measures 6.8 cm. in height and 6.4 cm. in width.

Retap the sleeve is available in several colours.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Magenta

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Red

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Yellow

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Light Blue

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: True White

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Orange

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Strong Green

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid suitable for Retap glass water bottle

Colour: Raspberry

The lid is made of TPE thermoplastic rubber free of BPA, phthalates and PVC.

The lid fits loosely and is therefore not close enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Lemon Lime

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Mint Blue

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Grey

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Frosted White

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.