Family

Organic sheet for Stokke Sleepi junior bed in GOTS certified organic cotton jersey.

The sheet is of the absolute best quality - strong and soft.

Wash at 60 degrees and possibly dry in a tumble dryer.

The sheet fits a mattress measuring 74x169 cm.

See the entire Cocoon Company collection

A kapok roll mattress is both soft and comfortable to sleep on.

If you have a mattress with a lot of good years left in it, you can easily take advantage of kapok's properties by simply acquiring a roll mattress in organic kapok.

Kapok is something very special. Kapok insulates, regulates temperature and transports moisture away from the body, which is super ideal for small children who often have difficulty regulating their body temperature. Kapok is also recommended for allergy sufferers, as house dust mites cannot live in the fibre, due to a natural content of an antibacterial bitter substance.

The roll-top mattress can also be used on top of a kapok mattress if you think the kapok mattress is a little too hard.

This roll-top mattress fits a Juno junior bed and measures 62x144 cm. The roll mattress is hand-stuffed with untreated organic kapok, covered with a spring of 100% organically certified cotton.
Since it is hand-stuffed, there may be some variation in the measurements.

Please also use it for the Juno baby bed. You just tuck the excess piece of mattress under the mattress until the bed is expanded with the additional mattress.

Maintenance of your kapok mattress

And they are definitely worth taking good care of.

As a rule, you should only wash your kapok mattress if strictly necessary.

If the stains are minor, then recommend we spot wash.

If it is necessary to wash your kapok mattress topper, do it like this:

• Wash preferably at 40 degrees to protect the fibre. However, 60 degrees is possible if necessary.
• Choose a short washing program, as the kapok cannot stand being wet for too long
• Choose centrifugation at 1200 revolutions to get as much water as possible out of the kapok
• Use a gentle detergent without enzymes or bleach. For example, Cocoon's soap berry or a fine detergent with or without probiotics
• Do not use fabric softener
• Dry the kapok roller mattress immediately after wash

• The kapok mattress pad is dried in the dryer alone
• Give yourself plenty of time. We recommend using dryer balls in wool to reduce drying time. They also ensure that the fibers are gently separated
• Do not use tennis balls as they break the fiber
• Choose a 30 minute program with medium heat. Look at the kapok mattress topper and repeat until it is slightly damp.
• Let the kapok mattress to dry in a warm place until the rest of the moisture is gone.
• Be careful not to dry too long in the dryer, as this can reduce the life of the fiber.

See the entire Cocoon Company collection

Wool pillow from Cocoon

The wool pillow is made of organic merino wool and organic GOTS certified cotton

This pillow measures 40x45 cm.

A wool pillow is a soft and temperature-regulating choice. The wool's content of lanolin enables it to absorb moisture from the body - without the pillow becoming damp in itself.

It is also the lanolin that makes the wool pillow antibacterial and ensures that house dust mites cannot live in it.

Wool pillows from Cocoon Company are produced in Europe. And the wool itself comes from organic merino sheep from South America.

South America is a super good climate for sheep. In that climate, the sheep are not affected by parasites and flies, which makes it completely unnecessary to spray them or carry out the cruel mulesing, as the sheep generally just thrive.

Maintenance of your wool pillow from Cocoon Company

On the other hand, it is a very good idea to air the pillow regularly. It is good for the humidity in the pillow and for the lightness. If you can air it in freezing weather, it is the absolute best thing you can do.

If an accident has occurred, however, we recommend that you spot wash the pillow.

Alternatively, you can of course also send it to be cleaned if a more thorough cleaning of the pillow is necessary.

The wool pillow must never be tumbled dry, but must instead be left to dry.

See the entire Cocoon Company collection

Wool pillow from Cocoon

The wool pillow is made of organic merino wool and organic GOTS certified cotton

This pillow measures 40x45 cm. and is padded a little extra so that it is suitable for slightly older children.

A wool pillow is a soft and temperature-regulating choice. The wool's content of lanolin enables it to absorb moisture from the body - without the pillow becoming damp in itself.

It is also the lanolin that makes the wool pillow antibacterial and ensures that house dust mites cannot live in it.

Wool pillows from Cocoon Company are produced in Europe. And the wool itself comes from organic merino sheep from South America.

South America is a super good climate for sheep. In that climate, the sheep are not affected by parasites and flies, which makes it completely unnecessary to spray them or carry out the cruel mulesing, as the sheep generally just thrive.

Maintenance of your wool pillow from Cocoon Company

On the other hand, it is a very good idea to air the pillow regularly. It is good for the humidity in the pillow and for the lightness. If you can air it in freezing weather, it is the absolute best thing you can do.

If an accident has occurred, however, we recommend that you spot wash the pillow.

Alternatively, you can of course also send it to be cleaned if a more thorough cleaning of the pillow is necessary.

The wool pillow must never be tumbled dry, but must instead be left to dry.

See the entire Cocoon Company collection

A roll-top mattress in organic kapok is soft and incredibly comfortable to lie on.

The roll-top mattress can either be used on top of a kapok mattress, which can be relatively hard.

Or you can also just buy an organic kapok roll-top mattress to lie on top of your current mattress. It is a simple way to take advantage of kapok's special properties.

Kapok roll mattresses insulate, regulate temperature and transport moisture away from the body. These are properties that are super ideal for small children who may have difficulty regulating their body temperature.

This mattress topper fits a Next2me bed measuring 50x83 cm. The mattress topper is hand-filled with untreated organic kapok, covered with a spring of 100% organic certified cotton.
The mattress topper is hand-sewn, so please be aware that there may be variations in the goal.

Kapok is also recommended for allergy sufferers, as house dust mites cannot live in the fibre, due to a natural content of an antibacterial bitter substance.

Maintenance of your kapok mattress

And they are definitely worth taking good care of.

As a general rule, you should only wash your kapok mattress if strictly necessary.

If the stains are minor, we recommend spot washing.

If necessary to wash your kapok mattress topper, do it like this:

• Wash preferably at 40 degrees to protect the fibre. However, 60 degrees is possible if necessary.
• Choose a short washing program, as the kapok cannot stand being wet for too long
• Choose centrifugation at 1200 revolutions to get as much water as possible out of the kapok
• Use a gentle detergent without enzymes or bleach. For example, Cocoon's soap berry or a fine detergent with or without probiotics
• Do not use fabric softener
• Dry the kapok roller mattress immediately after wash

• The kapok mattress pad is dried in the dryer alone
• Give yourself plenty of time. We recommend using dryer balls in wool to reduce drying time. They also ensure that the fibers are gently separated
• Do not use tennis balls as they break the fiber
• Choose a 30 minute program with medium heat. Look at the kapok mattress topper and repeat until it is slightly damp.
• Let the kapok mattress to dry in a warm place until the rest of the moisture is gone.
• Be careful not to dry too long in the dryer, as this can reduce the life of the fiber.

See the entire Cocoon Company collection

This beautiful thermos bottle - TKPro - from Klean Kanteen is a 100% plastic-free alternative for those of you who need to have coffee or cold drinks with you on the go.

A super robust and durable thermos bottle that you can enjoy for many years.

If you are tired of the buy-and-throw-away culture, here is a super durable alternative for coffee at work, cocoa on Sunday or for cold water or smoothies in the summer.

The thermos bottle has a stainless steel screw cap and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavor to your drinks, nor does it absorb flavors from the drinks you have had in it.

The thermos bottle has Klean Kanteen´s Climate Lock™, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This thermos bottle of 750 ml. can keep your drinks hot for 28 hours and cold for 90 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicone ring around the screw lid ensures the tightness.

The cup for this thermos bottle can hold 305ml.

The thermos bottle measures 26cm. in height and 8.75 cm. in diameter.

This thermos bottle is in the color Shale Black. The color is spray-painted on, which is both deliberate and very durable.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Sage.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color/design Rover - Deep Blue (Stone Finish)

The drinking bottle has a rustic finish, but still shiny.

The finish is the most durable from 24 Bottles. It is both extra strong and at the same time extremely beautiful to look at.

The surface counteracts and hides scratches.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and will therefore easily be put in the bag without it lying around and getting wet.

With a stainless steel thermos drinking bottle from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Pink Marble (Satin Finish)

This drinking bottle can hold 330 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 15 cm. in height and 7.3 cm. in diameter. It weighs 202 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo bottle from Klean Kanteen in steel

Klean Kanteen's TKWide thermos bottle in stainless steel is perfect for when you are on the go.

It works super well both as a to-go thermos bottle and insulated water bottle.

With the entermo bottle in stainless steel you can save the environment from huge amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used again and again and should be able to last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your hot and cold drinks.

The thermos bottle keeps your drinkshot for 22 hours and cold for 75 hours.

The lid of this thermos bottle is a screw cap with a stainless steel interior. The thermos bottle is completely sealed and is easy to use. And then it ensures an internal environment in pure stainless steel, so that your drinks do not come into contact with plastic.

The thermos bottle can contain 946ml.

The opening on thermos bottles is 66 mm., which makes it easy to fill or pour from it. There is also plenty of room to get ice cubes into the cup.

Thermo bottle gauge 251mm. in height and 92.7mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

The thermos flask should be washed by hand, as the insulating effect can be damaged by the dishwasher.

Use if necessary. a practical bottle cleaner like this one for the purpose.

See our huge selection from Klean Kanteen just here

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the Tivoli design (Satin Finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Infuser lid for thermos drinking bottle in stainless steel from 24Bottles.

The lid can transform your drinking bottle into a fantastic infuser, where you can brew the most delicious infusions and herbal teas.

The lid fits all Clima models - i.e. all thermos drinking bottles in stainless steel from 24Bottles.

The infuser lid is leak-proof and stainless steel - however with a top in plastic.

This lid is in the color Grey.

Infuser lid for thermos drinking bottle in stainless steel from 24Bottles.

The lid can transform your drinking bottle into a fantastic infuser, where you can brew the most delicious infusions and herbal teas.

The lid fits all Clima models - i.e. all thermos drinking bottles in stainless steel from 24Bottles.

The infuser lid is leak-proof and in stainless steel - however with a plastic top.

This lid is in the color Green.

Stainless steel drinking bottle from 24 Bottles.

This drinking bottle can hold 1 liter and is made of stainless steel.

The drinking bottle is in the color Formal Gray (Stone Finish)

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in the bag when you are on the go.

Stainless steel does not give off flavor to your drinks, nor does it take on the taste of the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw cap made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25.5 cm. in height and 8 cm. in diameter. It weighs 163 gr.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle is dishwasher safe, but can also be cleaned with great advantage with this bottle cleaner.

Straw set for Klean Kanteen's TKWide thermos.

Your straw lid will turn your TKWide thermos into a perfect smoothie to-go cup in an instant.

A 10mm stainless steel straw is included. (slightly larger than Klean Kanteen's other straws, so it fits perfectly for smoothies)

A food-grade silicone straw extension is also included, so you can make the straw fit all Klean Kanteen's TKWide sizes.

This straw lid is not tight, unlike all Klean Kanteen's other lids, so be aware that you should not lay your TKWide into the bag when this lid is on.

The straw set is dishwasher safe.

Watch this video for tips on cleaning straws:

https://youtu.be/vjssAvlHQZE

The lid is made of BPA free plastic.

This Straw Lid fits all Klean Kanteen's TKWide thermos cups or thermos bottles.

Stainless steel straws from AYA&IDA

4 pure stainless steel straws from Danish AYA&IDA

Colour: Black

The straws come in a practical pack of 4. The package also contains a straw brush for quick cleaning after use.

These straws are of the 'Drinking Straws' type, which correspond to the very classic straw with a kink.

Stainless steel straws are a super good alternative to disposable plastic straws. These straws can be used again and again and therefore save the environment from a whole lot of disposable plastic.

At the same time, stainless steel straws are a clean material that does not emit harmful chemicals into your drinks - whether they are cold or hot, sour or sweet. The straws also do not pick up any taste from the drinks.

The straws are for those who want straws that last forever.

These straws are made of 18/8 food-grade stainless steel.

The straws measure 6 x 215 mm.

The color of the straws is pure titanium, which has been steam deposited. It is the most durable method for the purpose and also means that the color does not fade over time.

Maintenance of your stainless steel straws

These stainless steel straws are most easily cleaned immediately after use with the practical straw brush.

But you can also easily put them in the dishwasher. However, our experience is that the straws here risk getting dirtier than they were before, as the dirt from the other things in the dishwasher can settle into the straws.

Stainless steel straws from AYA&IDA

4 pure stainless steel straws from Danish AYA&IDA

Colour: Black

The straws come in a practical pack of 4. The package also contains a straw brush for quick cleaning after use.

These straws are of the 'ShortStraws' type, which are short straws without kinks. They are perfect for children or for drinks.

Stainless steel straws are a great alternative to disposable plastic straws. These straws can be used again and again and therefore save the environment from a whole lot of disposable plastic.

At the same time, stainless steel straws are a clean material that does not emit harmful chemicals into your drinks - whether they are cold or hot, sour or sweet. The straws also do not pick up any taste from the drinks.

The straws are for those who want straws that last forever.

These straws are made of 18/8 food-grade stainless steel.

The straws measure 6 x 145 mm.

The color of the straws is pure titanium, which has been steam deposited. It is the most durable method for the purpose and also means that the color does not fade over time.

Maintenance of your stainless steel straws

These stainless steel straws are most easily cleaned immediately after use with the practical straw brush.

But you can also easily put them in the dishwasher. However, our experience is that the straws here risk getting dirtier than they were before, as the dirt from the other things in the dishwasher can settle into the straws.

Thermo cup from 24Bottles

This one is in the color Atlantic Bay.

The color is matte (Stone Finish) and is very durable.

A thermos cup is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermos cup weighs 225 gr. and can hold 350 ml.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo mug from 24Bottles

This one is in the color Rose Gold (Chrome Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours or your cold drinks cold for 24 hours.

The thermo cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

You can, however, easily put the lid in the dishwasher.

Thermo mug from 24Bottles

This one is in the color Deep Blue (Hammertone Finish)

The finish is rustic but glossy and is extremely durable.

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo cup from 24Bottles

Thermo cup in stainless steel from 24Bottles

This is in the color of pure stainless steel.

A thermos cup is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

Maintenance of your stainless steel thermos cup

The thermos cup from 24Bottles should be washed by hand. It safely colors and the function lasts as long as possible.

You can easily put the lid in the dishwasher, however.

Thermo cup from 24Bottles

Thermo cup in stainless steel from 24Bottles

This one is made of pure stainless steel

A thermos cup is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours or your cold drinks cold for 24 hours.

The thermo cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 18.5 cm. in height.

The thermo cup weighs 307gr. and can hold 600 ml.

Maintenance of your stainless steel thermos cup

The thermos cup from 24Bottles should be washed by hand. It safely colors and the function lasts as long as possible.

You can easily put the lid in the dishwasher, however.

Thermo mug from 24Bottles

This one is in the design Sequoia Wood (Satin Translucid Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours or your cold drinks cold for 24 hours.

The thermo cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo mug from 24Bottles

This one is in the design Sequoia Wood (Satin Translucid Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours or your cold drinks cold for 24 hours.

The thermo cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 18.5 cm. in height.

The thermo cup weighs 307 gr. and can hold 600 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Amazing Maize pillow made of corn fibers from Cocoon Company

Vegan pillow made of corn from Cocoon Company.Baby pillow 40 x 45 cm.

Made of organically certified and completely chemical-free cotton and filled with corn fibers.

Corn pillows are reusable, degradable and a completely natural and vegan alternative.

Corn pillows are delicious and airy like down pillows, and breathable like wool and kapok.

The corn fiber is hollow, which gives it temperature-regulating properties. The moisture is directed through the pillow instead of being absorbed.

The corn fiber is, technically, a plant-based biopolymer fiber based on lactic acid, which is extracted from plant sugar from corn in a kind of fermentation process.

In fact, the production of the corn fiber requires 68% less fossil fuels than the production of a synthetic fiber duvet.

Maintenance of your corn pillow

You don't need to wash your corn pillow before use. No harmful chemicals are added in the manufacturing process.

But your corn pillow can easily be washed. However, we recommend that you only do it when necessary, as washing wears out the product and the fiber.

So feel free to air your pillow regularly. Frosty weather is especially good for airing duvets and pillows.

If the pillow is to be washed, it can be washed at 60 degrees, but preferably lower, so that you protect the fine corn fiber and take a little extra care of the environment.

Make sure to run the wash at low revolutions - again to take good care of the fine corn fiber so that it does not tangle. However, should this happen, you can easily filter out the fibers again.

Dry the pillow in a tumble dryer at medium heat. Very happy with these drying balls, which reduce the drying time by approx. 25%.

See the entire Cocoon Company collection

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Aqua Green (Satin Finish)

The surface is matt and durable and provides a good grip on the bottle.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Stainless steel drinking bottle from 24 Bottles.

This version is in the color Aqua Green (Satin Finish)

This drinking bottle can hold 0.5 liters and is made of pure stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in the bag when you are on the go.

Stainless steel does not give off flavor to your drinks, nor does it take on the taste of the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 21 cm. in height and 6.5 cm. in diameter. It weighs 116 gr.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand with this bottle cleaner.

Thermo mug from 24Bottles

This one is in the design Black Marble (Glossy Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo cup from 24Bottles

This one is in the design Carrara (Glossy Finish)

A thermos cup is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo cup from 24Bottles

This one is in the design Carrara (Glossy Finish)

A thermos cup is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours or your cold drinks cold for 24 hours.

The thermo cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 18.5 cm. in height.

The thermo cup weighs 307 gr. and can hold 600 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Reusable straws made of tempered glass

Scandinavian Concept Zero has made a super good offer for sustainable straws made of tempered glass.

These glass straws with a kink are made of completely pure, high-quality glass and meet all EU requirements for products in contact with food.

Defined in 10 different transparent colors and are heat-resistant up to 40^o

The color of this straw is transparent grey.

The glass straw has a diameter of 6 mm. and measures 215 mm. in length.

Glass straws

Glass is a clean and very hygienic material. The glass straws from Concept Zero contain no chemical substances and are BPA-free, rust-free, allergy-friendly and taste-free. And they are produced CO2 neutral.

The straws from Concept Zero are packaged in matte bags, made from cassava starch; a plant-based material that is biodegradable.

Use

These glass straws have a long shelf life and can easily be washed in the dishwasher. Rinse them in cold water first.

If you wash the straws by hand, we recommend the specially made brush that you find here. It's also good for removing any food residue inside the straw before you put it in the dishwasher.

The ends are rounded so they're perfectly safe to drink from, but we don't recommend glass straws for toddlers. Here we would instead suggest bamboo straws or steel straws.

Steel straws can be found here.

Bamboo straws can be found Here.

Ingredients: Olea Europaea fruit oil*, water, sodium hydroxide, sodium phytate, citric acid (*organic).

Bubble Buddy's natural products

Bubble Buddy was created by the Dutch designer Foekje Fleur, who sees plastic as a cool, necessary and modern material - if and only if you use it correctly and with care and only for necessary purposes purpose.

Foekje Fleur takes a huge responsibility for nature and transforms waste products from nature into functional everyday objects. In particular, she recycles plastic from the discarded plastic product - i.a. bottles.

Plastic is NOT meant to end up in the oceans and nature in general - it must be recycled! For example, as a beautiful soap dish with grate and grater that you can use for your organic soap bar.

With a Bubble Buddy soap dish, you also have the option to grate your soap bar into soap shavings on the built-in grater, and use the soap shavings for e.g. cleaning, soaking or soapy water for your baby.

A soap bar is a fantastic natural choice. Here you save nature from a lot of plastic packaging and the transport of large quantities of water.

The soap bars are compact and concentrated and thus also economical to use.

Biodegradable toothbrush with children's motif

Available with monkey, dinosaur, unicorn, hippopotamus, rabbit and koala. This variant is printed with ABE

The compostable toothbrush is ergonomically designed so that it fits incredibly well in the small hand and it is made of GMO-free corn starch.

This toothbrush is biodegradable, so throw it in your compost pile when it is finished or bury it if necessary. down in the garden when it can do no more. The children will certainly find it fun too - but remember to break off the brush head first, it must be recycled.

The extra soft brushes are made of reusable nylon.

We recommend that the brush be used together with Jack N' Jill's organic, mild and fluoride-free toothpaste for children, which can be swallowed without worry. Find our selection of children's toothpaste here.

NOTE! The toothbrush cannot withstand sterilization by cooking and using a microwave.

The packaging of the Jack N' Jill children's toothbrush is also biodegradable and can be advantageously thrown into the compost. It is made from recycled cardboard and cornstarch.

Nursing pads in cotton

Nursing pads in organic cotton from Sweden Imse Vimse.

The package contains 6 pieces.

This variant is in the color black.

The nursing pads measure 12 cm. in diameter.

Cotton nursing pads are indispensable for absorbing excess milk.

You can use them to great advantage together with wool/silk nursing pads to ensure that the breast is kept warm. It minimizes the risk of mastitis.

Maintenance of your cotton nursing pads

The nursing pads can be washed in the washing machine at 60 degrees.

Please wash them a few times before use.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Green Marble (Glossy Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Hush (Satin Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Ice White (Satin Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Camo Zone (Satin Finish)

The drinking bottle can hold 330 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 15 cm. in height and 7.3 cm. in diameter. It weighs 202 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Mint (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima Bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This drinking bottle is in the design Camo Zone (Satin Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and will therefore easily be put in the bag without it lying around and getting wet.

With a stainless steel thermos drinking bottle from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Infuser for your Clima Bottle

Infuser lid for Clima drinking bottle in stainless steel from 24Bottles.

The lid can transform your drinking bottle into a fantastic infuser, where you can brew the most delicious infusions and herbal teas.

The lid fits all Clima models - i.e. all thermos drinking bottles in stainless steel from 24Bottles.

The infuser lid is leak-proof and stainless steel - but with a plastic top.

This lid is in the color Light Blue

Infuser for your Clima Bottle

Infuser lid for Clima drinking bottle in stainless steel from 24Bottles.

The lid can transform your drinking bottle into a fantastic infuser, where you can brew the most delicious infusions and herbal teas.

The lid fits all Clima models - i.e. all thermos drinking bottles in stainless steel from 24Bottles.

The infuser lid is leak-proof and stainless steel - but with a plastic top.

This lid is in the color Light Green

Infuser for your Clima Bottle

Infuser lid for Clima drinking bottle in stainless steel from 24Bottles.

The lid can transform your drinking bottle into a fantastic infuser, where you can brew the most delicious infusions and herbal teas.

The lid fits all Clima models - i.e. all thermos drinking bottles in stainless steel from 24Bottles.

The infuser lid is leak-proof and stainless steel - but with a plastic top.

This lid is in the color Light Pink

Infuser for your Clima Bottle

Infuser lid for Clima drinking bottle in stainless steel from 24Bottles.

The lid can transform your drinking bottle into a fantastic infuser, where you can brew the most delicious infusions and herbal teas.

The lid fits all Clima models - i.e. all thermos drinking bottles in stainless steel from 24Bottles.

The infuser lid is leak-proof and stainless steel - but with a plastic top.

This lid is in the color Light Yellow

Thermo mug from 24Bottles

This one is in the color Dusty Pink (Stone Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo mug from 24Bottles

This one is in the color Ice White (Satin Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermo mug from 24Bottles

This one is in the color Powder Blue (Stone Finish)

A thermos mug is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermos cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Urban bottle from 24Bottles

Stainless steel drinking bottle from 24Bottles.

This version is in the color Powder Blue (Stone Finish)

This drinking bottle can hold 0.5 liters and is made of pure stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the go.

Stainless steel does not give off flavor to your drinks, nor does it take on flavor from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 21 cm. in height and 6.5 cm. in diameter. It weighs 116 gr. The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.