Drinking bottles in stainless steel

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Formal Gray (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Stainless steel drinking bottle from 24 Bottles

This version is in the color Taxi Yellow. (Stone Finish)

This drinking bottle can hold 0.5 liters and is made of pure stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the go.

Stainless steel does not give off flavor to your drinks, nor does it take on the taste of the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 21 cm. in height and 6.5 cm. in diameter. It weighs 116 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is in pure stainless steel Navy Blue

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel Winter White

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

24Bottles Urban drinking bottle

Stainless steel drinking bottle from 24Bottles.

This version is in the design SEA FRIENDS (Glossy Finish)

This drinking bottle can hold 250 ml. and is made of stainless steel.

The size is perfect for children or to take in your bag on short trips.

The drinking bottle has a sports lid, which makes it easier for small children to use.

The lid is spill-proof, but not leak-proof, so be careful about putting it down in your bag without extra protection. Buy any a screw lid for when you go on a trip.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the move.

Combine if necessary. with this ingenious thermos cup or thermos lunch box that fits.

Stainless steel does not give off flavor to your drinks nor does it pick up flavor from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a plastic screw cap and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 13.7 cm. in height and 6.5 cm. in diameter. It weighs 78 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

Maintenance of your 24Bottles Urban

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

To clean the sports lid, we recommend this brilliant straw brush. It fits perfectly in the small opening.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

24Bottles Urban

Urban stainless steel drinking bottle from 24 Bottles.

This version is designed Best Friends (Glossy Finish)

The drinking bottle has a sports lid, which makes it easier to use it for sports, etc. where you don't have to open it with your hands.

It's spill-free, but not leak-proof, so be careful about putting it down in your bag without extra protection. Buy any a screw lid for when you go on a trip.

This drinking bottle can hold 0.5 liters and is made of pure stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in the bag when you are on the go.

With a stainless steel drinking bottle you can store your drinks in a clean environment. Stainless steel is one of the absolute cleanest materials for your drinks.

Stainless steel does not impart flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking can from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug measures 20 cm. in height and 6.5 cm. in diameter. It weighs 132 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand with this bottle cleaner.

24Bottles Urban

Urban stainless steel drinking bottle from 24 Bottles.

This version is designed Sea Friends (Glossy Finish)

The drinking bottle has a sports lid, which makes it easier to use it for sports, etc. where you don't have to open it with your hands.

It's spill-free, but not leak-proof, so be careful about putting it down in your bag without extra protection. Buy any a screw lid for when you go on a trip.

This drinking bottle can hold 0.5 liters and is made of pure stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in the bag when you are on the go.

With a stainless steel drinking bottle you can store your drinks in a clean environment. Stainless steel is one of the absolute cleanest materials for your drinks.

Stainless steel does not impart flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking can from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug measures 20 cm. in height and 6.5 cm. in diameter. It weighs 132 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand with this bottle cleaner.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel in the color Ash Rose

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside or outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking can fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. Therefore, it is recommended to wash it by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel in the color EUCALYPTUS

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal as ensures that the drinking can is completely sealed.

The drinking can fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle, you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

Klean Kanteen the drinking bottle can hold 532 ml. and has a sports lid

This drinking bottle is in the color Old Gold

The color is spray-painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to your bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

It makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color recommends We recommend that you wash the dishes by hand, as the color wears off a lot and can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part just here

Watch the video below for tips on cleaning the Sport Cap.

This Klean Kanteen drinking bottle measures 22.5 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 185 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any off-tastes nor does it take on flavors from your drinks.

Klean Kanteen the drinking bottle can hold 800 ml. and has a sports lid

This drinking bottle is in the color Pastel Turquoise

The color is spray-painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to your bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

It makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color recommends We recommend that you wash the dishes by hand, as the color wears off a lot and can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part just here

Watch the video below for tips on cleaning the Sport Cap.

This Klean Kanteen drinking bottle measures 27.6 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 212 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

Klean Kanteen thermos bottle

This beautiful thermos bottle - TKPro - from Klean Kanteen is a 100% plastic-free alternative for you who need to have coffee or cold drinks with you on the go.

A super robust and durable thermos bottle that you can enjoy for many years.

Then you are tired of the buy-and-throw-away culture, then here is a super durable alternative for coffee at work, cocoa on Sunday or for cold water or smoothies in the summer.

Colour: Fairway

The thermos bottle has a stainless steel screw cap and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavors to your drinks and also does not absorb the taste of the drinks you have had in it.

The thermos bottle has Klean Kanteen's Climate Lock, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This 750 ml thermos bottle. can keep your drinks hot for 28 hours and cold for 90 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicone ring around the screw lid ensures the tightness.

The cup for this thermos bottle can contain 305 ml.

The thermal bottle measures 26 cm. in height and 8.75 cm. in diameter.

This thermos bottle is in the color Shale Black. The color is spray painted on, which is both deliberate and very durable.

Klean Kanteen thermos bottle

This beautiful thermos bottle - TKPro - from Klean Kanteen is a 100% plastic-free alternative for you who need to have coffee or cold drinks with you on the go.

A super robust and durable thermos bottle that you can enjoy for many years.

Then you are tired of the buy-and-throw-away culture, then here is a super durable alternative for coffee at work, cocoa on Sundays or for cold water or smoothies in the summer.

Colour: Tofu

The thermos bottle has a stainless steel screw cap and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavors to your drinks and also does not absorb the taste of the drinks you have had in it.

The thermos bottle has Klean Kanteen's Climate Lock, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This 750 ml thermos bottle. can keep your drinks hot for 28 hours and cold for 90 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicone ring around the screw lid ensures the tightness.

The cup for this thermos bottle can contain 305 ml.

The thermal bottle measures 26 cm. in height and 8.75 cm. in diameter.

This thermos bottle is in the color Shale Black. The color is spray painted on, which is both deliberate and very durable.

Thermo bottle from Klean Kanteen in steel

Klean Kanteen's TKWide stainless steel thermos bottle is perfect for when you are on the go.

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color BLUE TINT

With a stainless steel thermos bottle you can save the environment for enormous amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used over and over again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour from it. There is also plenty of room to get ice cubes into the cup.

The thermos measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

The thermos flask should be washed by hand, as the insulating effect can be damaged by the dishwasher.

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

See our huge range from Klean Kanteen just here

Watch this video for tips on thoroughly cleaning the Twist Cap:

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Amnesia design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Black Radiance

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Lotus design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Pure Love design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The color is Driftwood

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed. In addition, the lid has a silicone ring on the outside, which makes it easier to get a grip on the lid.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking bottle can contain 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Stainless steel drinking bottle from 24 Bottles

This version is in the design Dusty Pink (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the go.

Stainless steel does not give off flavor to your drinks, nor does it take on the taste of the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw cap made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 21 cm. in height and 6.5 cm. in diameter. It weighs 116 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand with this bottle cleaner.

See our large selection from 24Bottles just here

Clima Bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This drinking bottle is in the color Begonia

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will thus not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

This Shaker Bottle in stainless steel is from Danish AYA&IDA.

The color is Tropical Green

The Shaker Bottle is a sports drink bottle made for your training, where it can either be used as a water bottle or as a shaker for your protein shake - it works perfectly for both. The drinking bottle can contain 750 ml. and is available in four delicious colours: Cream Beige, Soft Rose, Dark Gray and Tropical Green. The drinking bottle also comes with a small ball, which is used to mix the protein powder with when the bottle is used as a protein shaker.

The Aya&Ida Shaker Bottle drinking bottle is produced in 1-layer food-approved stainless steel 18/8 in the highest quality, and with a functional lid in high-quality polypropylene plastic. The drinking bottle is designed for quick use and to take with you on the go, and therefore has no thermo function, which makes it perfect for a quick protein shake before or after training. The lid has a silicone seal which ensures that the drinking bottle is completely sealed.

The color is powder coated. It gives a rough look, a delicious feel to the bottle and a more durable colour.

The drinking bottle is not suitable for a trip in the dishwasher, as this can eventually destroy the coating and the lid itself. It is therefore recommended that it be washed by hand.

Thermo bottle in stainless steel from Yummii Yummii

A drinking bottle in stainless steel lasts for most things - and should last almost forever.

Stainless steel is a completely clean material that does not emit harmful chemicals into your drinks. And it doesn't take on the taste, smell or color of the drinks you put in it either.

The drinking bottle also has a stainless steel lid and is kept tight with a silicone seal.

The thermos has a thermo effect and can keep drinks cold for up to 24 hours and hot for up to 8 hours.

The wide opening makes it easy to fill and easy to clean.

The bottle is powder coated on the outside, which gives the bottle a durable and resistant surface.

This thermos bottle has beautiful little tulips on it and is therefore called TULIP

It measures 17.5 x 7 cm. and the opening of the bottle measures 4.5 cm.

It can hold 350 ml.

The thermo bottle is made of stainless steel (18/8 food grade) and is a 100% plastic-free drinking bottle.

It comes in a bag made of GOTS certified organic cotton, which can be used to transport the bottle. Or maybe for hand fruit.

Use and maintain your stainless steel thermos bottle

The thermos bottle from Yummii Yummii cannot withstand being put in the dishwasher.

Then clean it by hand. Possibly with this practical bottle cleaner.

The bottle is not suitable for use in the microwave.

See the entire range from Yummi Yummi here

Thermo bottle in stainless steel from Yummii Yummii

A drinking bottle in stainless steel lasts for most things - and should last almost forever.

Stainless steel is a completely clean material that does not emit harmful chemicals into your drinks. And it doesn't take on the taste, smell or color of the drinks you put in it either.

The drinking bottle also has a stainless steel lid and is kept tight with a silicone seal.

The thermos has a thermo effect and can keep drinks cold for up to 24 hours and hot for up to 8 hours.

The wide opening makes it easy to fill and easy to clean.

The bottle is powder coated on the outside, which gives the bottle a durable and resistant surface.

This thermos bottle has fire-breathing dragons on it and is therefore called DRAGON

It measures 17.5 x 7 cm. and the opening of the bottle measures 4.5 cm.

It can hold 350 ml.

The thermos bottle is made of stainless steel (18/8 food grade) and is a 100% plastic-free thermos bottle.

It comes in a bag made of GOTS certified organic cotton, which can be used to transport the bottle. Or maybe for hand fruit.

Use and maintain your stainless steel thermos bottle

The thermos bottle from Yummii Yummii cannot stand being put in the dishwasher.

Then clean it by hand. Possibly with this practical bottle cleaner.

The bottle is not suitable for use in the microwave.

See the entire range from Yummi Yummi here

This beautiful thermos bottle - TKPro - from Klean Kanteen is a 100% plastic-free alternative for those of you who need to have coffee or cold drinks with you on the go.

A super robust and durable thermos bottle that you can enjoy for many years.

If you are tired of the buy-and-throw-away culture, here is a super durable alternative for coffee at work, cocoa on Sunday or for cold water or smoothies in the summer.

The thermos bottle has a stainless steel screw lid and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavor to your drinks, nor does it absorb flavors from the drinks you have had in it.

The thermos bottle has Klean Kanteen´s Climate Lock™, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This thermos bottle of 500 ml. can keep your drinks hot for 20 hours and cold for 75 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicone ring around the screw lid ensures the tightness.

The cup for this thermos bottle can hold 216 ml.

The thermos bottle measures 26cm. in height and 7.47 cm. in diameter.

This thermos bottle is in the color Shale Black. The color is powder coated and is extremely durable.

Thermo drinking bottle in stainless steel from 24 Bottles.

This drinking bottle is in the color Atlantic Bay (Stone Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Klean Kanteen TKPro thermos bottle - Tofu white

A super robust and durable thermos bottle that you can enjoy for many years.

Then you are tired of buy-and-throw-away culture, here is a super durable alternative for coffee at work, cocoa on Sundays or for cold water or smoothies in the summer.

Colour: Tofu

The thermos bottle has a stainless steel screw cap and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavor to your drinks nor does it absorb flavor from the drinks you have had in it.

The thermos bottle has Klean Kanteen's Climate Lock, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This 1000 ml thermos bottle. can keep your drinks hot for 28 hours and cold for 90 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicon ring around the screw lid ensures the tightness.

The cup for this thermos bottle can hold 305 ml.

The thermos bottle measures 31 cm. in height and 8.75 cm. in diameter.

The color is spray-painted on, which is both deliberate and very durable.

TKWide thermos bottle from Klean Kanteen in stainless steel

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color SEA SPRAY

With a stainless steel thermos bottle you can save the environment from huge amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used again and again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour. There is also plenty of room to get ice cubes into the cup.

The thermos flask measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

Watch this video for tips on thoroughly cleaning the Twist Cap:

Klean Kanteen TKPro thermos bottle - Fairway green

A super robust and durable thermos bottle that you can enjoy for many years.

Then you are tired of buy-and-throw-away culture, here is a super durable alternative for coffee at work, cocoa on Sundays or for cold water or smoothies in the summer.

Colour: Fairway

The thermos bottle has a stainless steel screw cap and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavor to your drinks nor does it absorb flavor from the drinks you have had in it.

The thermos bottle has Klean Kanteen's Climate Lock, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This 1000 ml thermos bottle. can keep your drinks hot for 28 hours and cold for 90 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicon ring around the screw lid ensures the tightness.

The cup for this thermos bottle can hold 305 ml.

The thermos bottle measures 31 cm. in height and 8.75 cm. in diameter.

The color is spray-painted on, which is both deliberate and very durable.

Super smart dust protector that fits Klean Kanteen's drinking bottle with sports lid.

Then you can easily put the protector over the sports spout and prevent it from getting dirty.

The dust protector is made of plastic in the color Black

The dust protector is only compatible with Klean Kanteen's 3rd generation sports lid - i.e. the ones on the market now.

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle, you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not emit any off-tastes nor does it take on flavors from your drinks.

Klean Kanteen the drinking bottle can hold 800 ml. and has a sports lid

This drinking bottle is in the color Old Gold

The color is spray-painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to the bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

It makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color recommends We recommend that you wash the dishes by hand, as the color wears off a lot and can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part just here

Watch the video below for tips on cleaning the Sport Cap.

This Klean Kanteen drinking bottle measures 27.6 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 212 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

Stainless steel thermos from 24Bottles - Platinum

This version is in the Platinum design, and can hold 500 ml.

The thermos is produced in a two-layer, high-quality stainless steel, which thus creates a fantastic insulating effect for the liquid you have inside. The thermos bottle can keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

Use if necessary. this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

Urban drinking bottle in stainless steel from 24 Bottles

The drinking can can hold 0.5 liters and is made of stainless steel. Stainless steel does not impart flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw cap made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 21 cm. in height and 6.5 cm. in diameter. It weighs 116 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand with this bottle cleaner.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel and in the color Light Grey

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has silicone seal which ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 330 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

24Bottles Urban drinking bottle

Stainless steel drinking bottle from 24Bottles.

This version is in the design Lucky Dog (Limited Edition)

This drinking bottle can hold 250 ml. and is made of stainless steel.

The size is perfect for children or to take in your bag on short trips.

The drinking bottle has a sports lid, which makes it easier for small children to use.

The lid is spill-proof, but not leak-proof, so be careful about putting it down in your bag without extra protection. Buy any a screw lid for when you go on a trip.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the move.

Combine if necessary. with this ingenious thermos cup or thermos box that fits.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

The drinking bottle has a plastic screw cap and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking bottle measures 13.7 cm. in height and 6.5 cm. in diameter. It weighs 78 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

Maintenance of your 24Bottles Urban

The drinking bottle should be cleaned by hand after each use.

Use if necessary. this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

To clean the sports lid, we recommend this brilliant straw brush. It fits perfectly in the small opening.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Klean Kanteen thermos bottle

This beautiful thermos bottle - TKPro - from Klean Kanteen is a 100% plastic-free alternative for those of you who need to have coffee or cold drinks with you on the go.

A super robust and durable thermos bottle that you can enjoy for many years.

Then you are tired of the buy-and-throw-away culture, then here is a super durable alternative for coffee at work, cocoa on Sundays or for cold water or smoothies in the summer.

Colour: Fairway

The thermos bottle has a screw cap in stainless steel and a practical thermos lid - also in stainless steel, which can be used as a cup.

The entire inner environment is therefore in stainless steel, which creates a clean environment - without harmful chemicals - for your drinks.

Stainless steel does not give off flavor to your drinks nor does it absorb flavor from the drinks you have had in it.

The thermos bottle has Klean Kanteen's Climate Lock, which is a double-walled vacuum insulation that keeps your drinks cold or hot for many hours.

This 500 ml thermos bottle. can keep your drinks hot for 20 hours and cold for 75 hours.

The screw lid can be opened and used as a pouring spout - or unscrewed completely if you wish.

The thermos bottle is tight and will not leak in the bag.

A small silicone ring around the screw lid ensures the tightness.

This thermos bottle is in the color Fairway. The color is spray painted on which is very durable.

This version is in the design Ice White (Stone Finish)

This drinking bottle can hold 0.85 liters and is made of two-layer stainless steel with an insulating effect.

The drinking bottle measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

A drinking bottle from 24Bottles will save you a ton of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up any flavor from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The color is Lavender

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed. In addition, the lid has a silicone ring on the outside, which makes it easier to get hold of the lid.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking bottle can hold 750 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This Klean Kanteen drinking bottle is truly the luxury model within thermos drinking bottles with straws.

The bottle is made from 90% recycled 18/8 stainless steel and is both BPA-free and odor- and taste-neutral. The durable Klean Coat powder coating ensures that the bottle stays nice, even with daily use.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or on your belt.

Klean Kanteen is a certified B Corp and a member of 1% for the Planet, which means they donate 1% of their sales to environmental organizations.

The opening of the thermos cup is 66 mm, which makes it easy to fill or pour from the cup. There is also room for ice cubes in the cup if you also want to use it for cold drinks and smoothies.

Klean Kanteen the thermos cup measures 263 mm. in height and 92.7 mm. in diameter.

Use
Ideal for cold drinks, so use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc. The drinking bottle is not suitable for hot or carbonated liquids due to the built-in steel straw.

Cleaning
The bottle and lid can be washed in the dishwasher, but hand washing is recommended to extend the life of the product.

Maintenance
To ensure optimal performance and hygiene, it is recommended to disassemble the lid and clean all parts thoroughly after use.​

Note, however, that the bottle is not 100% leak-proof, and it is therefore recommended to use a separate screw cap if the bottle is to be transported lying down in the bag.

The Sippy Cap has a practical handle in stainless steel, which makes it easy to hang the bottle on the pram, bag or belt when you are on speed.

Specifications

• Height: 19.3 cm

• Diameter: 6.5 cm

• Opening diameter: 4.4 cm

• Weight: 133 g

Maintenance

• The bottle should be washed by hand to preserve the color optimally.

• Use a bottle cleaner for thorough cleaning.

• Natural and effective descaling is recommended for lime deposits.

• The Sippy Cap should be cleaned daily, and regularly separated and scalded to prevent bacteria.

Note that the sports lid is spill-free but not 100% leak-free, so consider adding a screw-on lid for longer trips.

This water bottle is designed to last you a lifetime. You can replace the lids as needed and purchase additional accessories, such as a stainless steel screw lid or a new sports lid.

Specifications
Capacity: 800 ml
Material: Stainless steel, BPA-free polypropylene
Height: 27.6 cm
Diameter: 7.3 cm
Opening diameter: 4.4 cm
Weight: 212 g

Maintenance

• Wash by hand to preserve the color
• Use a bottle cleaner for effective cleaning
• For limescale deposits, natural and effective descaling is recommended

Maintenance of the Sports Lid

• Disassemble the lid and scald the parts regularly
• Clean the silicone spout with a small straw brush
• ​​​​​​​Spare parts available if needed

NOTE: Not suitable for children under 3 years due to small parts.

Main features

• Volume: 500 ml
• Material: 18/8 food grade steel – free of BPA, BPS, PES, PFAS and phthalates
• Weight: 117 g
• Dimensions: Ø 6.5 cm × H 21 cm, bottle neck Ø 3.3 cm
• Closing­mechanism: Tight screw cap with silicone gasket

Care and maintenance

• Hand wash with warm water and mild soap after use
• For deep cleaning, you can use a mixture of lukewarm water with vinegar or a teaspoon of baking soda
• Dry the bottle upside down without a lid so that it air dries completely
• Dishwasher: Not recommended to preserve the matte finish for as long as possible

Main features

• Volume: 500 ml
• Material: 18/8 food grade steel – free of BPA, BPS, PES, PFAS and phthalates
• Weight: 117 g
• Dimensions: Ø 6.5 cm × H 21 cm, bottle neck Ø 3.3 cm
• Closure­mechanism: Tight screw lid with silicone gasket

Care and maintenance

• Hand wash with warm water and mild soap after use
• Wipe the bottle upside down without the lid so that it air dries completely
• Dishwasher: Not recommended

Specifications

• Height: 32.0 cm

• Diameter: 9.5 cm

• Opening diameter: 6 cm

• Weight: 850 g

Maintenance

• The bottle should be washed by hand to preserve the color optimally.

• If necessary, use a bottle cleaner for thorough cleaning.

• Natural and effective descaling is recommended for lime deposits.

Klean Kanteen TKWide 1900 ml is the choice for you who want a long-lasting, chemical-free thermos bottle in professional quality – without compromising on insulation or design. Take it anywhere and enjoy hot tea by the campfire, cold water in the office or a challenging hike without running out.