Drinking bottles

CUP2GO thermo cup from AYA&IDA

Togo cup in stainless steel is from Danish AYA&IDA.

This version is in the color Cream Beige

Variant: Small - 380 ml.

The Togo cup has a thermo effect and can keep your drinks cold or hot.

So use it for coffee or tea, smoothies or iced coffee when you're on the go or just when you're at home and might not be able to drink the coffee right away.

The thermos cup stays warm for 1.5 to 2 hours (depending on brewing temperature). So the idea is that you should drink your coffee immediately after you have poured it.

The thermo function also ensures that the cup does not get too hot to hold.

The Togo cup is produced in food-grade stainless steel - 18/8.

The lid is made of BPA-free plastic and has a silicone seal that ensures that the togo cup is completely sealed.

The lid can be opened with one hand, which makes it super useful in many everyday situations. Both when you're sitting in the car, on the bus or when you're walking through town with your togo coffee.

If the lid is properly clicked on, it's completely tight and you can easily put your togo cup in your bag.

The togo cup fits perfectly in the cup holder of most cars. We recommend that you of course measure the cup holder in your car if you want to be on the safe side.

The Togo cup can hold 380 ml.

It measures 14.5 cm. in height and 8.5 cm. in diameter in the opening itself and 7 cm. at the bottom.

Weight: 220 gr.

When you buy a stainless steel togo cup from AYA&IDA, Økofamily in collaboration with AYA&IDA donates 100 liters of water to children in Africa through UNICEF.

Maintenance of your togo cup from AYA&IDA

Cup2go can withstand being put in the dishwasher

Otherwise, it can be easily cleaned by hand with a bottle cleaner like this one or with a practical glass brush like

CUP2GO Thermo Cup from AYA&IDA

This edition is in the colour Matte Black

Variant: Small - 380 ml.

The travel mug has a thermoeffect and can keep your drinks cold or hot.

Use it for coffee or tea, smoothies or iced coffee when you're on the go or just at home when you might not drink your coffee right away.

The thermo cup keeps warm for 1.5 to 2 hours (depending on brewing temperature). So the idea is that you should drink your coffee shortly after pouring it.

The thermo function also ensures that the cup does not become too hot to hold.

The travel mug is made of food-grade stainless steel - 18/8.

The lid can be opened with one hand, making it super handy in many everyday situations. Both when sitting in the car, on the bus or walking through the city with your to-go coffee.

If the lid is clicked on correctly, it is completely leak-proof and you can safely put your travel mug in your bag.

The travel mug fits perfectly in the cup holder of most cars. We recommend that you measure your car's cup holder to be sure.

The travel mug can hold 380 ml.

It measures 14.5 cm in height, 8.5 cm in diameter at the opening and 7 cm at the base.

Weight: 220 gr.

When you buy a stainless steel travel mug from AYA&IDA, Økofamilien, in collaboration with AYA&IDA, donates 100 litres of water to children in Africa through UNICEF.

Maintenance of your travel mug from AYA&IDA

CUP2GO Thermo Cup from AYA&IDA

This version is in the colour Matte Black

Variant: Large - 500 ml.

The to-go cup has a thermal effect and can keep your beverages cold or hot.

So use it for coffee or tea, smoothies or iced coffee when you're on the go or just at home and maybe don't drink your coffee straight away.

The thermos cup keeps hot for 1.5 to 2 hours (depending on brew temperature). So the idea is to drink your coffee immediately after pouring it.

The thermal function also ensures that the cup doesn't get too hot to hold.

The to-go cup is made of food-grade approved stainless steel - 18/8.

The lid can be opened with one hand, making it super handy in many everyday situations. Whether you're in the car, on the bus, or walking through the city with your to-go coffee.

If the lid is clicked properly on, it is completely leak-proof and you can easily put your to-go cup in the bag.

The to-go cup fits perfectly in the cup holder of most cars. We recommend that you measure the cup holder in your car, just to be sure.

The to-go cup can hold 500 ml.

It measures 17 cm. in height and 8.5 cm. in diameter at the opening and 7 cm. at the base.

Weight: 255 gr.

When you purchase a stainless steel to-go cup from AYA&IDA, Økofamilien in collaboration with AYA&IDA donates 100 litres of water to children in Africa through UNICEF.

Maintenance of your to-go cup from AYA&IDA

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Cream Beige.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking bottle can hold 1 liter - and does not take up much space despite that it has a thermal effect.

The drinking can measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426 gr.

Also available in 500 ml. in 4 beautiful colors - and in 750 ml. in 3 beautiful colors.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24 Bottles.

This drinking bottle is in the design Pink Marble (Glossy Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner same with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Klean Kanteen drinking bottle children

Drinking bottle in stainless steel for children.

The drinking bottle can hold 355 ml. and has a sports lid

This drinking bottle is in the Planets design

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle, you are sure that no harmful chemicals are transferred to your child's drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful when placing it into the bag without extra protection. Buy any a screw lid for when you go on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to the bag, belt or stroller.

The drinking bottle is designed to grow with the child. Therefore, you can mix lids as needed and possibly you can also buy a Sippy Cap or a screw cap in pure stainless steel for it.

This makes the drinking can very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color, we recommend that you wash dishes by hand, as the color gets very worn and can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the drinking spout clean.

In addition to regular cleaning, we recommend that you separate Open the sports lid occasionally and scald the parts in boiling water.

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it has been doing, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part here

Watch the video below for tips on cleaning the Sport Cap.

The drinking bottle measures 19.6 cm. in height and 6.5 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 138 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any off-tastes nor does it take on flavors from your drinks.

Klean Kanteen the drinking bottle can hold 800 ml. and has a sports lid

This drinking bottle is in the color Hawaiian Ocean

The color is spray-painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to your bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

It makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color recommends We recommend that you wash the dishes by hand, as the color wears off a lot and can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part just here

Watch the video below for tips on cleaning the Sport Cap.

This Klean Kanteen drinking bottle measures 27.6 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 212 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any off-tastes nor does it take on flavors from your drinks.

Klean Kanteen the drinking bottle can hold 800 ml. and has a sports lid

This drinking bottle is in the color Green Apple

The color is spray-painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to your bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

It makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color recommends We recommend that you wash the dishes by hand, as the color wears off a lot and can be damaged by the dishwasher.

If necessary, use this brilliant bottle cleaner for washing up your drinking bottle by hand.

See the video below for tips on cleaning the Sport Cap.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part here

This Klean Kanteen drinking bottle measures 27.6 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 212 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any off-tastes nor does it take on flavors from your drinks.

Klean Kanteen the drinking bottle can hold 800 ml. and has a sports lid

This drinking bottle is in the design Black Camo

The color is spray-painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to your bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

It makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's drinking bottle with color recommends We recommend that you wash the dishes by hand, as the color wears off a lot and can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part just here

Watch the video below for tips on cleaning the Sport Cap.

This Klean Kanteen drinking bottle measures 27.6 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 212 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

A Klean Kanteen drinking bottle for life

Stainless steel drinking bottle.

This Klean Kanteen drinking bottle can hold up to most things. And then it is made of steel, which is one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any off-tastes nor does it take on flavors from your drinks.

Klean Kanteen the drinking bottle can hold 800 ml. and has a sports lid

This drinking bottle is in the color Blue Tint

The color is spray-painted with Klean Kanteen's Clean Coat, which is a very durable coating. The color is matt in its expression.

The sports lid is made of BPA-free polypropylene and is spill-free.

However, the drinking bottle is not leak-proof, so be careful not to put it in the bag without extra protection. Buy any a screw lid for when you are going on a trip.

The sports lid has a practical handle, so you can easily attach the drinking bottle to your bag, belt or stroller.

The drinking bottle is designed to be a drinking bottle for life. also buy a screw lid in pure stainless steel for it. Or just a new sports lid when the one on it can't do it anymore.

Maintenance of your Klean Kanteen drinking bottle

Klean Kanteen's colored drinking bottle, we recommend that you wash it by hand, as the color very worn and can be damaged by the dishwasher.

Use if necessary. this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

Maintenance of Klean Kanteens Sports lid

It is important to keep the sports lid clean.

In addition to regular cleaning, we recommend that you separate The sports lid occasionally and scald the parts in boiling water.

You can take out the silicone spout itself and clean the inside behind it. Possibly with a straw brush

Then you are sure that there are no bacteria hiding inside the spout.

If your sports lid starts to drip more than it did, then it may be because the small silicone valve at the top is loose or has fallen off. You can buy it as a spare part just here

Watch the video below for tips on cleaning the Sport Cap.

This Klean Kanteen drinking bottle measures 27.6 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 212 gr.

NOTE: The drinking can is not suitable for children under 3 years of age, as there are small parts in the sports lid that can come loose.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 41 hours and hot for 16 hours.

It is great smart on a hot summer's day - and certainly also at school and kindergarten, where it can simply be left in the bag.

The drinking can can hold 355 ml. and has a screw lid

This thermal drinking bottle is in the color Marigold

The color is spray-painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle for the bag, belt or pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports cap, a Sippy Cap or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 21.5 cm. in height and 6.6 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 275 gr.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 41 hours and hot for 16 hours.

It is great smart on a hot summer's day - and certainly also at school and kindergarten, where it can simply be left in the bag.

The drinking can can hold 355 ml. and has a screw lid

This thermos drinking bottle is in the color Lotus

The color is spray painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle for the bag, belt or pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports cap, a Sippy Cap or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 21.5 cm. in height and 6.6 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 275 gr.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermal drinking bottle is in the color Marigold

The color is spray-painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle for the bag, belt or pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

Thermo drinking bottle from Klean Kanteen

Klean Kanteen thermo drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermos drinking bottle is in the color Real Teal

The color is spray painted with Klean Kanteen's Clean Coat, which is a very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle, you can easily attach the drinking bottle to the bag, the belt or the pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermos drinking bottle is in the color Blue Tint

The color is spray painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle for the bag, belt or pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Dark Grey.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking bottle can hold 1 liter - and does not take up much space despite that it has a thermal effect.

The drinking can measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426 gr.

Also available in 500 ml. in 4 beautiful colors - and in 750 ml. in 3 beautiful colors.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

CUP2GO Thermo Cup from AYA&IDA

This edition is in the colour Dark Grey

Variant: Large - 500 ml.

The to-go cup has a thermo effect and can keep your drinks cold or warm.

Use it for coffee or tea, smoothies or iced coffee when you're on the go or just at home and maybe don't drink your coffee right away.

The thermo cup keeps warm for 1.5 to 2 hours (depending on brewing temperature). So the idea is to drink your coffee immediately after pouring it.

The thermo function also ensures that the cup doesn't get too hot to hold.

The to-go cup is made of food-grade stainless steel 18/8.

The lid can be opened with one hand, making it super useful in many everyday situations. Whether you're in the car, on the bus, or walking through the city with your to-go coffee.

If the lid is properly clicked on, it is completely tight and you can easily put your to-go cup in your bag.

The to-go cup fits perfectly in the cup holder of most cars. We recommend, of course, measuring the cup holder in your car if you want to be sure.

The to-go cup can hold 500 ml.

It measures 17 cm in height and 8.5 cm in diameter at the opening and 7 cm at the base.

Weight: 255 g.

When you purchase a to-go cup in stainless steel from AYA&IDA, Økofamilien in collaboration with AYA&IDA donates 100 litres of water to children in Africa through UNICEF.

Maintenance of your to-go cup from AYA&IDA

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Emerald Green (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Mangrove (Satin Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color TAXI YELLOW (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you for a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color TOTAL ORANGE (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

24Bottles Urban drinking bottle

Stainless steel drinking bottle from 24Bottles.

This version is in the design BEST FRIENDS (Glossy Finish)

This drinking bottle can hold 250 ml. and is made of stainless steel.

The size is perfect for children or to take in your bag on short trips.

The drinking bottle has a sports lid, which makes it easier for small children to use.

The lid is spill-proof, but not leak-proof, so be careful about putting it down in your bag without extra protection. Buy any a screw lid for when you go on a trip.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the move.

Combine if necessary. with this ingenious thermos cup or thermos lunch box that fits.

Stainless steel does not give off flavor to your drinks nor does it pick up flavor from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a plastic screw cap and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 13.7 cm. in height and 6.5 cm. in diameter. It weighs 78 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

Maintenance of your 24Bottles Urban

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

To clean the sports lid, we recommend this brilliant straw brush. It fits perfectly in the small opening.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Thermocup from 24Bottles

This one is in the design BEST FRIENDS (Glossy Finish)

A thermos cup or thermos box like this is perfect for taking your food on the go. This Travel Tumbler keeps your coffee or food hot for 6 hours or cold for 24 hours.

The thermo cup is completely sealed, so you don't have to worry about leaks in the bag.

24Bottles the thermo cup has a Fill and Go lid, which has a wide opening for easier cleaning. The lid is a screw lid. If you need to be able to drink from the lid, you can consider this sports lid for the purpose.

The lid has an integrated bottle handle, so it is easier to carry.

The thermos cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks drinks.

The lid is plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

Thermocup from 24Bottles

This one is in the design ATLAS (Stone Finish)

A thermos cup is perfect for taking your coffee or cold drinks with you on the go. It keeps you warm for 6 hours or yours cold for 24 hours.

The thermos cup is also completely sealed, so you don't have to worry about leaks in your bag.

This thermos cup has a Sport and Go lid. The sports lid is easy to open - even with one hand.

The sports lid has a silicone straw in the thermo cup itself, so you can drink from it in an upright position.

NOTE: The thermo cup can easily be used for hot drinks. Just not with that lid. The Sport and Go lid with straw is only suitable for cold drinks.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 18.5 cm. in height.

The thermo cup weighs 307 gr. and can hold 600 ml.

The bottles and cups from 24Bottles with the many colorful patterns may well get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

We recommend that you clean the straw and the sports spout itself with this brilliant straw brush. It fits the opening perfectly.

Thermocup from 24Bottles

Thermocup in stainless steel from 24Bottles

This one is in the design Candy Pink (Satin Finish)

A thermos cup or thermos box like this is perfect for taking your food on the go. This Travel Tumbler keeps your coffee or food hot for 6 hours or cold for 24 hours.

The thermo cup is completely sealed, so you don't have to worry about leaks in the bag.

24Bottles the thermo cup has a Fill and Go lid, which has a wide opening for easier cleaning. The lid is a screw lid. If you need to be able to drink from the lid, you can consider this sports lid for the purpose.

The lid has an integrated bottle handle, so it is easier to carry.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

The thermos cup from 24Bottles should be washed by hand. It ensures that the colors and the function last as long as possible.

However, you can easily put the lid in the dishwasher.

Thermo cup from 24Bottles

This one is in the design Cloud Blue (Satin Finish)

A thermos cup or lunch box like this is perfect for taking your food on the go. This Travel Tumbler keeps your coffee or food hot for 6 hours or cold for 24 hours.

The thermo cup is completely sealed, so you don't have to worry about leaks in the bag.

24Bottles the thermo cup has a Fill and Go lid, which has a wide opening for easier cleaning. The lid is a screw lid. If you need to be able to drink from the lid, you can consider this sports lid for the purpose.

The lid has an integrated bottle handle, so it is easier to carry.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is plastic.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your stainless steel thermos cup

However, you can easily put the lid in the dishwasher.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel Lavender

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermocup from 24Bottles

This one is in the design TUXEDO BLACK

A thermos cup is perfect for taking your coffee on the go. It keeps your coffee hot for 6 hours and your cold drinks cold for 24 hours.

The thermo cup is also completely sealed, so you don't have to worry about leaks in the bag.

The thermo cup is made of stainless steel, which is one of the absolute cleanest materials for storing your hot drinks.

The lid is made of plastic.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The thermo cup measures 8 cm. in diameter (measured at the bottom) and 12.5 cm. in height.

The thermo cup weighs 225 gr. and can hold 350 ml.

Maintenance of your stainless steel thermos cup

With the lid, however, you can easily put it in the dishwasher.

Clima Bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This drinking bottle is in the color Tuxedo Black (Stone Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

CUP2GO Thermal Cup from AYA&IDA

This edition is in the colour Lavender

Variant: Large - 500 ml.

The to-go cup has a thermal effect and can keep your beverages cold or warm.

So use it for coffee or tea, smoothies or iced coffee when you're on the go or just at home when you might not drink your coffee right away.

The thermal cup keeps warm for 1.5 to 2 hours (depending on brew temperature). So the idea is to drink your coffee right after pouring it.

The thermal function also ensures that the cup doesn't get too hot to hold.

The to-go cup is made from food-grade stainless steel - 18/8.

The lid can be opened with one hand, making it super practical in many everyday situations. Whether you're sitting in the car, on the bus, or walking through the city with your to-go coffee.

If the lid is clicked on properly, it is completely tight, and you can safely place your to-go cup in your bag.

The to-go cup fits perfectly in the cup holder of most cars. We recommend measuring the cup holder in your car to be sure.

The to-go cup has a capacity of 500 ml.

It measures 17 cm in height and 8.5 cm in diameter at the opening and 7 cm at the base.

Weight: 255 gr.

When you purchase a stainless steel to-go cup from AYA&IDA, Økofamilien in collaboration with AYA&IDA donates 100 litres of water to children in Africa through UNICEF.

Maintenance of Your AYA&IDA To-Go Cup

Stainless steel drinking bottle from 24 Bottles.

This version is in the color Tuxedo Black (Stone Finish)

This drinking bottle can hold 0.5 liters and is made of pure stainless steel.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh much in your bag when you are on the go.

If you want to avoid scratching the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Stainless steel does not impart flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a plastic screw cap and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 21 cm. in height and 6.5 cm. in diameter. It weighs 116 gr.

The drinking bottle should be cleaned by hand with this bottle cleaner.

Thermo bottle from Klean Kanteen

Klean Kanteen makes drinking flasks and drinking bottles that last forever.

They design so that everything is suitable for outdoor people, but they embrace everyone.

This drinking bottle can hold up to most things. And then it is made of one of the absolute cleanest materials to store your drinks in - namely stainless steel.

With this drinking bottle, you are sure that no harmful chemicals are transferred to your drinks.

Stainless steel does not emit any aftertaste nor does it take on the taste of your drinks.

This thermos bottle has a Pour Through lid. A lid so that the contents are poured out from all sides at the top, just like a good classic thermos bottle.

And then the drinking bottle has a thermo function and can keep the water cold for 80 hours and hot for 24 hours.

It is so insanely smart on a hot summer day - and in general, where you can always just leave your drinking bottle in your bag. It keeps cold and warm in itself - without forming condensation.

The thermos bottle can hold 750 ml. and has a Pour Through lid.

This thermos bottle is in the color Black

The color is spray-painted with Klean Kanteen's Clean Coat, which is a very durable coating.

The color is matt in its expression.

The screw cap is in stainless steel. It has a silicone seal that keeps it tight.

The thermos is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

Maintenance of your Klean Kanteen thermos flask

We recommend that you wash the thermos flask by hand. The thermo function can be damaged by the dishwasher.

If necessary, use this brilliant bottle cleaner for washing your bottle by hand.

If your Klean Kanteen thermos bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one. The thermos bottle measures 28 cm. in height and 8 cm. in diameter.

The opening measures 4.4 cm. in diameter

The bottle weighs 440 gr.

This thermos bottle is made of 90% recycled 18/8 steel.

See our huge selection from Klean Kanteen just here

Ingenious thermos mug from Klean Kanteen

This thermos mug can last most things. And then it is made of one of the absolute cleanest materials to store your drinks in - namely stainless steel.

With this thermos mug, you are sure that no harmful chemicals are transferred to your drinks.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

This thermos mug is brilliant at home, in the coffee shop or by the edge of the campfire.

The thermos mug has a BPA-free lid. plastic. The lid is spill-free, but not so tight that you can put the mug down in the bag with contents.

It keeps cold and hot without forming condensation.

The thermos mug can hold 355 ml.

The color is spray-painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The lid is made of BPA-free plastic. It also has a silicone seal, which ensures that the lid fits and stays fairly tight.

Maintenance of your Klean Kanteen thermos mug

Use if necessary. this brilliant bottle cleaner for washing your bottle by hand. And otherwise, a dishwasher brush also fits nicely in it.

The thermos mug measures 10.8 cm. in height and 11.3 cm. in diameter (incl. the handle).

The opening measures 7.8 cm. in diameter

The bottle weighs 262 gr.

This thermos mug is made of 90% recycled 18/8 steel.

Ingenious thermos mug from Klean Kanteen

This thermos mug can last most things. And then it is made of one of the absolute cleanest materials to store your drinks in - namely stainless steel.

With this thermos mug, you are sure that no harmful chemicals are transferred to your drinks.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

This thermos mug is brilliant at home, in the coffee shop or by the edge of the campfire.

The thermos mug has a BPA-free lid. plastic. The lid is spill-free, but not so tight that you can put the mug down in the bag with contents.

It keeps cold and hot without forming condensation.

The thermos mug can hold 355 ml.

The color is spray-painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The lid is made of BPA-free plastic. It also has a silicone seal, which ensures that the lid fits and stays fairly tight.

Maintenance of your Klean Kanteen thermos mug

Use if necessary. this brilliant bottle cleaner for washing your bottle by hand. And otherwise, a dishwasher brush also fits nicely in it.

The thermos mug measures 10.8 cm. in height and 11.3 cm. in diameter (incl. the handle).

The opening measures 7.8 cm. in diameter

The bottle weighs 262 gr.

This thermos mug is made of 90% recycled 18/8 steel.

Ingenious thermos mug from Klean Kanteen

This thermos mug can last most things. And then it is made of one of the absolute cleanest materials to store your drinks in - namely stainless steel.

With this thermos mug, you are sure that no harmful chemicals are transferred to your drinks.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

This thermos mug is brilliant at home, in the coffee shop or by the edge of the campfire.

The thermos mug has a BPA-free lid. plastic. The lid is spill-free, but not so tight that you can put the mug down in the bag with contents.

It keeps cold and hot without forming condensation.

The thermos mug can hold 355 ml.

The color is spray-painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The lid is made of BPA-free plastic. It also has a silicone seal, which ensures that the lid fits and stays fairly tight.

Maintenance of your Klean Kanteen thermos mug

Use if necessary. this brilliant bottle cleaner for washing your bottle by hand. And otherwise, a dishwasher brush also fits nicely in it.

The thermos mug measures 10.8 cm. in height and 11.3 cm. in diameter (incl. the handle).

The opening measures 7.8 cm. in diameter

The bottle weighs 262 gr.

This thermos mug is made of 90% recycled 18/8 steel.

Stainless steel drinking bottle from 24 Bottles.

This drinking bottle can hold 1 liter and is made of stainless steel.

The drinking bottle is in the color Ice White (Stone Finish)

A drinking bottle from 24Bottles will save you a lot of plastic bottles. The drinking bottle is a lightweight drinking bottle and therefore does not weigh very much in your bag when you are on the go.

Stainless steel does not give off flavor to your drinks, nor does it take on the taste of the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw cap made of plastic and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25.5 cm. in height and 8 cm. in diameter. It weighs 163 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle is dishwasher safe, but can also be cleaned with great advantage with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Formal Gray (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Magenta

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Red

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Yellow

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Light Blue

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Orange

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Strong Green

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid suitable for Retap glass water bottle

Colour: Raspberry

The lid is made of TPE thermoplastic rubber free of BPA, phthalates and PVC.

The lid fits loosely and is therefore not close enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Lemon Lime

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Mint Blue

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Grey

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.

Lid for Retap glass water bottle

Lid that fits Retap glass water bottle

Colour: Frosted White

The lid is made of TPE Thermoplastic rubber free from BPA, phthalates and PVC.

The lid fits loose and is therefore not tight enough for you to put the drinking bottle in the bag.

The lid should make a clicking sound when you put it on. Then you are sure that it is firmly attached.

If it is too firmly attached when you have to take the lid off again, you can turn the bottle upside down so the lid gets wet. Then it's easy to remove.

It is not recommended to use the drinking bottle as you often use a traditional drinking bottle, as the lid can come loose and the bottle leak.