Thermal drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Cream Beige.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking bottle can hold 1 liter - and does not take up much space despite that it has a thermal effect.

The drinking can measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426 gr.

Also available in 500 ml. in 4 beautiful colors - and in 750 ml. in 3 beautiful colors.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24 Bottles.

This drinking bottle is in the design Pink Marble (Glossy Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner same with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 41 hours and hot for 16 hours.

It is great smart on a hot summer's day - and certainly also at school and kindergarten, where it can simply be left in the bag.

The drinking can can hold 355 ml. and has a screw lid

This thermos drinking bottle is in the color Black

The color is spray painted with Klean Kanteen's Clean Coat, which is a deliberate and very durable coating.

The color is matte in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle to the bag, the belt or the pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports cap, a Sippy Cap or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 21.5 cm. in height and 6.6 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 275 gr.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermos drinking bottle is in the color Black

The color is spray painted with Klean Kanteen's Clean Coat, which is a very durable coating.

The color is matte in its expression.

The screw lid is made of BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle to the bag, the belt or the pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermal drinking bottle is in the color Marigold

The color is spray-painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle for the bag, belt or pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

Thermo drinking bottle from Klean Kanteen

Klean Kanteen thermo drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermos drinking bottle is in the color Real Teal

The color is spray painted with Klean Kanteen's Clean Coat, which is a very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle, you can easily attach the drinking bottle to the bag, the belt or the pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermos drinking bottle is in the color Blue Tint

The color is spray painted with Klean Kanteen's Clean Coat, which is a conscious and very durable coating.

The color is matt in its expression.

The screw lid is in BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle for the bag, belt or pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

This makes the drinking bottle very durable.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel Dark Grey.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Dark Grey.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking bottle can hold 1 liter - and does not take up much space despite that it has a thermal effect.

The drinking can measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426 gr.

Also available in 500 ml. in 4 beautiful colors - and in 750 ml. in 3 beautiful colors.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Mangrove (Satin Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with hot water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Formal Gray (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is in pure stainless steel Navy Blue

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel Winter White

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Beautiful drinking bottle from AYA&IDA

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is the most beautiful Driftwood

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely tight.

The drinking bottle can hold 1 liter - and does not take up much space despite having a thermal effect.

The drinking can measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426 gr.

Also available in 500 ml. in 4 beautiful colors - and in 750 ml. in 3 beautiful colors.

The drinking can is not suitable for a trip in the dishwasher, as this can damage it the thermal capacity as well as the coating itself and the lid. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo bottle from Klean Kanteen in steel

Klean Kanteen's TKWide stainless steel thermos bottle is perfect for when you are on the go.

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color BLUE TINT

With a stainless steel thermos bottle you can save the environment for enormous amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used over and over again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour from it. There is also plenty of room to get ice cubes into the cup.

The thermos measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

The thermos flask should be washed by hand, as the insulating effect can be damaged by the dishwasher.

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

See our huge range from Klean Kanteen just here

Watch this video for tips on thoroughly cleaning the Twist Cap:

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Amnesia design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Black Radiance

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Gold Pines design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Lotus design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the Pure Love design

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The color is Driftwood

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed. In addition, the lid has a silicone ring on the outside, which makes it easier to get a grip on the lid.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking bottle can contain 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo drinking bottle in stainless steel from 24 Bottles.

This drinking bottle is in the color Atlantic Bay (Stone Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

TKWide thermos bottle from Klean Kanteen in stainless steel

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color SEA SPRAY

With a stainless steel thermos bottle you can save the environment from huge amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used again and again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour. There is also plenty of room to get ice cubes into the cup.

The thermos flask measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

Watch this video for tips on thoroughly cleaning the Twist Cap:

Stainless steel thermos from 24Bottles - Platinum

This version is in the Platinum design, and can hold 500 ml.

The thermos is produced in a two-layer, high-quality stainless steel, which thus creates a fantastic insulating effect for the liquid you have inside. The thermos bottle can keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

Use if necessary. this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

Stainless steel thermos flask from 24Bottles - Blue Oasis

This version is in the Blue Oasis design, and can hold 500 ml.

The thermo drink flask is produced in a two-layer, high-quality stainless steel, which thus creates a fantastic insulating effect for the liquid you have inside. The thermos bottle can keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

Use if necessary. this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

Stainless steel thermos from 24Bottles - Horizon Aurora

This version is in the Horizon Aurora design, and can hold 500 ml.

The thermos is produced in a two-layer, high-quality stainless steel, which thus creates a fantastic insulating effect for the liquid you have inside. The thermos bottle can keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

Use if necessary. this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel and in the color Light Grey

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has silicone seal which ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 330 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel and in the color Light Grey

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has silicone seal which ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 330 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This version is in the design Black Marble (Satin Finish)

This drinking bottle can hold 0.85 liters and is made of two-layer stainless steel with an insulating effect.

The drinking bottle measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

A drinking bottle from 24Bottles will save you a ton of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up any flavor from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

This version is in the design Ice White (Stone Finish)

This drinking bottle can hold 0.85 liters and is made of two-layer stainless steel with an insulating effect.

The drinking bottle measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

A drinking bottle from 24Bottles will save you a ton of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up any flavor from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Aya&Ida's drinking bottle keeps your water cold all day

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Driftwood

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense either inside or outside.

So use it for cold water, juice, coffee or tea when you're on the move.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated on. It gives a rough look and a more durable colour.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can hold 350 ml. and does not take up much space despite having a thermal effect.

The drinking jug measures 17.8 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 227 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This Klean Kanteen drinking bottle is truly the luxury model within thermos drinking bottles with straws.

The bottle is made from 90% recycled 18/8 stainless steel and is both BPA-free and odor- and taste-neutral. The durable Klean Coat powder coating ensures that the bottle stays nice, even with daily use.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or on your belt.

Klean Kanteen is a certified B Corp and a member of 1% for the Planet, which means they donate 1% of their sales to environmental organizations.

The opening of the thermos cup is 66 mm, which makes it easy to fill or pour from the cup. There is also room for ice cubes in the cup if you also want to use it for cold drinks and smoothies.

Klean Kanteen the thermos cup measures 263 mm. in height and 92.7 mm. in diameter.

Use
Ideal for cold drinks, so use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc. The drinking bottle is not suitable for hot or carbonated liquids due to the built-in steel straw.

Cleaning
The bottle and lid can be washed in the dishwasher, but hand washing is recommended to extend the life of the product.

Maintenance
To ensure optimal performance and hygiene, it is recommended to disassemble the lid and clean all parts thoroughly after use.​

Specifications

• Height: 32.0 cm

• Diameter: 9.5 cm

• Opening diameter: 6 cm

• Weight: 850 g

Maintenance

• The bottle should be washed by hand to preserve the color optimally.

• If necessary, use a bottle cleaner for thorough cleaning.

• Natural and effective descaling is recommended for lime deposits.

Klean Kanteen TKWide 1900 ml is the choice for you who want a long-lasting, chemical-free thermos bottle in professional quality – without compromising on insulation or design. Take it anywhere and enjoy hot tea by the campfire, cold water in the office or a challenging hike without running out.

This Klean Kanteen thermos cup is truly the luxury model within thermos cups.

The bottle is made from 90% recycled 18/8 stainless steel and is both BPA-free and odor- and taste-neutral. The durable Klean Coat powder coating ensures that the bottle stays nice, even with daily use.

The lid has a practical handle so you can clip your Klean Kanteen thermos to your bag or your belt.

Klean Kanteen is a certified B Corp and a member of 1% for the Planet, which means they donate 1% of their sales to environmental organizations.

The opening of the thermos cup is 66 mm, which makes it easy to fill or pour from the cup. There is also room for ice cubes in the cup if you also want to use it for cold drinks and smoothies.

Klean Kanteen the thermos cup measures 184 mm. in height and 76.2 mm. in diameter.

Use
Ideal for cold drinks, so use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc. The drinking bottle is not suitable for hot or carbonated liquids due to the built-in steel straw.

Cleaning
The bottle and lid can be washed in the dishwasher, but hand washing is recommended to extend the life of the product.

Maintenance
To ensure optimal performance and hygiene, it is recommended to disassemble the lid and clean all parts thoroughly after use.​

TKWide thermos bottle from Klean Kanteen in stainless steel

Klean Kanteen's TKWide thermos bottle in stainless steel is perfect for when you are on the go.

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color SHADOW LIME

With a stainless steel thermos bottle you can save the environment from huge amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used again and again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour. There is also plenty of room to get ice cubes into the cup.

The thermos flask measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

The thermos flask should be washed by hand, as the insulating effect can be damaged by the dishwasher.

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

See our huge range from Klean Kanteen just here

Watch this video for tips on thoroughly cleaning the Twist Cap:

TKWide thermos bottle from Klean Kanteen in stainless steel

Klean Kanteen's TKWide thermos bottle in stainless steel is perfect for when you are on the go.

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color CORSAIR

With a stainless steel thermos bottle you can save the environment from huge amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used again and again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour. There is also plenty of room to get ice cubes into the cup.

The thermos flask measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

The thermos flask should be washed by hand, as the insulating effect can be damaged by the dishwasher.

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

See our huge range from Klean Kanteen just here

Watch this video for tips on thoroughly cleaning the Twist Cap:

TKWide thermos bottle from Klean Kanteen in stainless steel

Klean Kanteen's TKWide thermos bottle in stainless steel is perfect for when you are on the go.

It works super well as an insulated water bottle or sports bottle.

This thermos bottle is in the color CLEAR SKY

With a stainless steel thermos bottle you can save the environment from huge amounts of waste in the form of both disposable cups and disposable bottles. Because this thermos bottle can be used again and again and should hopefully last for the next MANY years.

And then a stainless steel thermos bottle is the absolute cleanest alternative for your cold drinks.

The thermos bottle here keeps your drinks cold for 66 hours.

The lid of this thermos cup is a TWIST CAP. It keeps the thermos completely sealed and is easy to drink from with the built-in stainless steel straw.

The lid has a practical handle, so you can hook your Klean Kanteen thermos to your bag or belt.

We do not recommend using this Klean Kanteen thermos for hot drinks, because the built-in stainless steel straw.

So use it for smoothies, for water, for iced coffee, as a sports drink bottle, etc.

The thermos can hold 946 ml.

The opening of the thermos is 66 mm, which makes it easy to fill or pour. There is also plenty of room to get ice cubes into the cup.

The thermos flask measures 26 mm. in height and 93 mm. in diameter.

Maintenance of your Klean Kanteen thermos flask

The thermos flask should be washed by hand, as the insulating effect can be damaged by the dishwasher.

If necessary, use a practical bottle cleaner like this one for the purpose.

However, you can easily put the lid in the dishwasher. But we recommend taking it apart so you can clean the cap properly.

See our huge range from Klean Kanteen just here

Watch this video for tips on thoroughly cleaning the Twist Cap:

Cleaning
We recommend washing the bottle itself by hand to maintain the thermal effect and finish. The lid is dishwasher safe.

Specifications

• Capacity: 950 ml

• Material: Stainless steel 18/8, PP plastic, and silicone (Lid)

• Dimensions: Ø7.5 cm x 26 cm

• Weight: 362 g

• Color: Soft Rose

Cleaning
We recommend washing the bottle itself by hand to maintain the thermal effect and finish. The lid is dishwasher safe.

Specifications

• Capacity: 950 ml

• Material: Stainless steel 18/8, PP plastic, and silicone (Lid)

• Dimensions: Ø7.5 cm x 26 cm

• Weight: 362 g

• Color: Driftwood

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has silicone seal which ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Features and benefits

• 100% plastic-free: No paint, ink, coatings, or plastic.
• Quality materials: Made from 90% recycled steel and certified bamboo.
• Superior insulation: Keeps contents cold for up to 40 hours (iced).
• Health focus: Free from BPA, PFAS, and lead.
• Durable construction: Equipped with an "impact base cap" that protects the bottom from impacts.
• Easy maintenance: The bottle itself is dishwasher safe (the bamboo lid must be hand-washed).

Specifications

• Capacity: 355 ml (12 oz)
• Weight: 377 g
• Dimensions: 238.8 mm (H) x 68.6 mm (W)
• Opening: 44 mm
• Material: 90% recycled 18/8 stainless steel

Although this is technically an insulated water bottle with a screw cap, it also functions perfectly as a stylish drinking bottle for your everyday life. It is crafted from certified 90% recycled 18/8 stainless steel, making it a responsible choice for those wanting a product with a long lifespan. The durable Klean Coat® finish is resistant to scratches and impacts, ensuring the bottle maintains its sharp look.

Features and benefits

• Leakproof screw cap: The ergonomic Arch Loop Cap ensures the bottle stays sealed in your bag.
• Quality materials: Made from 90% recycled steel.
• Superior insulation: Keeps contents cold for up to 42 hours (iced) and hot for up to 14 hours.
• Health focus: Free from BPA, PFAS, and lead.
• Flavor neutral: Stainless steel neither absorbs nor imparts flavors.
• Easy maintenance: The bottle is dishwasher safe.

Specifications

• Capacity: 355 ml (12 oz)
• Weight: 366.9 g
• Dimensions: 262.4 mm (H) x 67.8 mm (W)
• Opening: 44 mm
• Material: 90% recycled 18/8 stainless steel

Although this is technically an insulated water bottle with a screw cap, it also functions perfectly as a stylish drinking bottle for your everyday life. It is crafted from certified 90% recycled 18/8 stainless steel, making it a responsible choice for those wanting a product with a long lifespan. The durable Klean Coat® finish is resistant to scratches and impacts, ensuring the bottle maintains its sharp look.

Features and benefits

• Leakproof screw cap: The ergonomic Arch Loop Cap ensures the bottle stays sealed in your bag.
• Quality materials: Made from 90% recycled steel.
• Superior insulation: Keeps contents cold for up to 42 hours (iced) and hot for up to 14 hours.
• Health focus: Free from BPA, PFAS, and lead.
• Flavor neutral: Stainless steel neither absorbs nor imparts flavors.
• Easy maintenance: The bottle is dishwasher safe.

Specifications

• Capacity: 355 ml (12 oz)
• Weight: 366.9 g
• Dimensions: 262.4 mm (H) x 67.8 mm (W)
• Opening: 44 mm
• Material: 90% recycled 18/8 stainless steel

Although this is technically an insulated water bottle with a screw cap, it also functions perfectly as a stylish drinking bottle for your everyday life. It is crafted from certified 90% recycled 18/8 stainless steel, making it a responsible choice for those wanting a product with a long lifespan. The durable Klean Coat® finish is resistant to scratches and impacts, ensuring the bottle maintains its sharp look.

Features and benefits

• Leakproof screw cap: The ergonomic Arch Loop Cap ensures the bottle stays sealed in your bag.
• Quality materials: Made from 90% recycled steel.
• Superior insulation: Keeps contents cold for up to 42 hours (iced) and hot for up to 14 hours.
• Health focus: Free from BPA, PFAS, and lead.
• Flavor neutral: Stainless steel neither absorbs nor imparts flavors.
• Easy maintenance: The bottle is dishwasher safe.

Specifications

• Capacity: 355 ml (12 oz)
• Weight: 366.9 g
• Dimensions: 262.4 mm (H) x 67.8 mm (W)
• Opening: 44 mm
• Material: 90% recycled 18/8 stainless steel

Although this is technically an insulated water bottle with a screw cap, it also functions perfectly as a stylish drinking bottle for your everyday life. It is crafted from certified 90% recycled 18/8 stainless steel, making it a responsible choice for those wanting a product with a long lifespan. The durable Klean Coat® finish is resistant to scratches and impacts, ensuring the bottle maintains its sharp look.

Features and benefits

• Leakproof screw cap: The ergonomic Arch Loop Cap ensures the bottle stays sealed in your bag.
• Quality materials: Made from 90% recycled steel.
• Superior insulation: Keeps contents cold for up to 42 hours (iced) and hot for up to 14 hours.
• Health focus: Free from BPA, PFAS, and lead.
• Flavor neutral: Stainless steel neither absorbs nor imparts flavors.
• Easy maintenance: The bottle is dishwasher safe.

Specifications

• Capacity: 355 ml (12 oz)
• Weight: 366.9 g
• Dimensions: 262.4 mm (H) x 67.8 mm (W)
• Opening: 44 mm
• Material: 90% recycled 18/8 stainless steel