Leaf razor

Leaf Shave a completely plastic-free product that can save you and the environment a whole lot of expensive disposable razors.

This Leaf Shave Razor is in the colour CHROME

It has a glossy finish. And clearly one of the most durable colors there is.

Leaf Shave is simple to use. You can use it for the whole body - including the intimate zones and it is suitable for both men and women.

Leaf Shave can be equipped with up to 3 single-edge blades, which give you a very close shave.

For sensitive skin or areas - for example intimate shaving, we recommend that you only load your Leaf Shave with the top 2 blades.

How to use your Leaf Shave

• Prepare your skin for shaving by washing with warm water and possibly light exfoliation. It makes the hairs softer and easier to shave.
• Use a good shaving soap. We can definitely recommend this from Isangs.
• Shave with your Leaf Shave. Both skin and razor should be moist when you start.
• You don't need to put extra pressure on the Leaf razor, just let the weight of the razor do the work
• If you think the Leaf razor is too aggressive, you can remove the lower razor blade
• Continuously rinse your Leaf Shave under warm water.
• Notice if you need to shave areas and repeat if necessary.
• Shaving done!

Cleaning your Leaf razor

Open your Leaf Shave and rinse it thoroughly after each use. Use possibly an old toothbrush if there are places where dirt is stuck.

Make sure the leaves are cleaned and have a chance to dry up.

Store your Leaf Shave in a dry place.

If there is limescale on your Leaf Shave, you can soak it in 1 part vinegar and 2 parts water for approx. 10 minutes.

Scrub it if necessary. clean with an old toothbrush and a little mild dishwashing detergent

Do not leave the safety razor soaked for a long time.

How to change the blades on your Leaf Shave

Your Leaf Shave can be equipped with up to 3 leaves. The blades are Single-Edge blades and you can find them here

• When you want to change the blades, you start by unscrewing the screw on the head of the Leaf razor. You have to screw clockwise to open it.
• The loose screw opens the razor blades, which you can now access.
• Replace the razor blades one by one.
• Make sure the blades are in the correct position in each compartment.
• Take care when handling the razor blades. They are really sharp!
• Turn the screw back in place - counter-clockwise. (see video further down the page)

If you want your Leaf Shave standing free, you can buy this brilliant holder for it.

The Leaf Shave razor is produced in Taiwan.

Packaging: The Leaf Shave razor comes in a cardboard box, which can be recycled together with your other cardboard waste

Note: The lifetime guarantee does not apply to the coating, which can develop a patina over time.

See the entire range from Leaf Shave hereSee our big guide on Safety Razors right here.

Leaf Shave a completely plastic-free product that can save you and the environment a whole lot of expensive disposable razors.

This Leaf Shave Razor is in the colour SILVER

It has a glossy finish. And clearly one of the most durable colors there is.

Leaf Shave is simple to use. You can use it for the whole body - including the intimate zones and it is suitable for both men and women.

Leaf Shave can be equipped with up to 3 single-edge blades, which give you a very close shave.

For sensitive skin or areas - for example intimate shaving, we recommend that you only load your Leaf Shave with the top 2 blades.

How to use your Leaf Shave

• Prepare your skin for shaving by washing with warm water and possibly light exfoliation. It makes the hairs softer and easier to shave.
• Use a good shaving soap. We can definitely recommend this from Isangs.
• Shave with your Leaf Shave. Both skin and razor should be moist when you start.
• You don't need to put extra pressure on the Leaf razor, just let the weight of the razor do the work
• If you think the Leaf razor is too aggressive, you can remove the lower razor blade
• Continuously rinse your Leaf Shave under warm water.
• Notice if you need to shave areas and repeat if necessary.
• Shaving done!

Cleaning your Leaf razor

Open your Leaf Shave and rinse it thoroughly after each use. Use possibly an old toothbrush if there are places where dirt is stuck.

Make sure the leaves are cleaned and have a chance to dry up.

Store your Leaf Shave in a dry place.

If there is limescale on your Leaf Shave, you can soak it in 1 part vinegar and 2 parts water for approx. 10 minutes.

Scrub it if necessary. clean with an old toothbrush and a little mild dishwashing detergent

Do not leave the safety razor soaked for a long time.

How to change the blades on your Leaf Shave

Your Leaf Shave can be equipped with up to 3 leaves. The blades are Single-Edge blades and you can find them here

• When you want to change the blades, you start by unscrewing the screw on the head of the Leaf razor. You have to screw clockwise to open it.
• The loose screw opens the razor blades, which you can now access.
• Replace the razor blades one by one.
• Make sure the blades are in the correct position in each compartment.
• Take care when handling the razor blades. They are really sharp!
• Turn the screw back in place - counter-clockwise. (see video further down the page)

If you want your Leaf Shave standing free, you can buy this brilliant holder for it.

The Leaf Shave razor is produced in Taiwan.

Packaging: The Leaf Shave razor comes in a cardboard box, which can be recycled together with your other cardboard waste

Note: The lifetime guarantee does not apply to the coating, which can develop a patina over time.

See the entire range from Leaf Shave hereSee our big guide on Safety Razors right here.

Customized shaving for the entire body
The Leaf Razor is designed to bridge the gap between the comfort of a modern system razor and the efficiency of a safety razor.

Up to three Single-Edge blades can be inserted into the razor.
 

• 3 blades: Provides the closest shave, ideal for legs or head shaving.

• 2 blades (remove the bottom one): Makes the razor milder. This is specifically recommended for sensitive skin and intimate shaving to reduce the risk of irritation.

• 1 blade: The mildest setting, suitable if the skin needs rest.

How to use your Leaf Razor
Thanks to the pivoting head, the technique is very similar to that used with a regular plastic razor, but without the need for pressure.
 

• Preparation: Wash the skin with warm water and potentially a mild exfoliation to lift the hairs.

• Lather: Apply a good shaving soap (e.g., from Isangs) to ensure optimal glide.

• Shaving: Guide the razor over the skin in long strokes. Most importantly: do not apply pressure. Let the weight of the razor and the sharp blades do the work.

• Rinse: Rinse the head continuously under warm water to remove hair and soap.

Changing blades
The Leaf Razor uses a magnetic system that makes changing blades easy.
 

1. Turn the screw on the head counter-clockwise to open.

2. Place the blades in the desired positions (magnets hold them in place).

3. Close the head and tighten the screw clockwise.

Tip: Watch your fingers – the blades are very sharp.

Maintenance and cleaning
To preserve the matte black finish and the mechanism's function, the razor should be rinsed thoroughly after each use.
 

• Open the head and rinse internally to remove soap residue.

• Store the razor in a dry place – here the included stand is ideal, as it allows water to drain off.

• For limescale deposits: Soak the razor in a solution of 1 part vinegar and 2 parts water for approx. 10 minutes. Afterwards, scrub lightly with a soft toothbrush. Do not let it soak for longer than recommended.

Package contents:

• 1 x Leaf Razor (Black)

• 1 x Leaf Razor Stand (Black)

• 1 x Leaf Recycling Tin (for used blades)

• 1 x Pack of 10 blades (in the box with the razor)

• 1 x Pack of 50 blades (separate)

• Total 60 Single-Edge razor blades.

Packaging: Recyclable cardboard.