Thermos drinking bottle with screw lid

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The color is Tropical Green

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed. In addition, the lid has a silicone ring on the outside, which makes it easier to get a grip on the lid.

The color is powder coated. It gives a true look and a more durable colour.

The drinking bottle can contain 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can damage the dentherm capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also findhere.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel in the color Driftwood

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside or outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking can fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. Therefore, it is recommended to wash it by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Stainless steel drinking bottle from Danish AYA&IDA.

This version is in the color Matte Black.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking can fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Drinking can in stainless steel from Danish AYA&IDA.

This version is in the color Mint Green.

The drinking can has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking can does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking can fits perfectly in a cup holder.

The drinking bottle can hold 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the go.

The drinking bottle is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed. In addition, the lid has a silicone ring on the outside, which makes it easier to get a grip on the lid.

The drinking bottle can hold 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

Also available in 500 ml. in 4 beautiful colors - and in 1 liter in the color Cool Grey.

The drinking can is not suitable for a trip in the dishwasher, as this can damage the dentherm capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also findhere.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Pink Marble (Satin finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo stainless steel drinking bottle from 24Bottles.

This version is in the color/design Rover - Moss Green (Hammertone Finish)

The drinking bottle has a rustic finish, but still glossy.

The finish is the most durable from 24Bottles. It is both extra strong and at the same time extremely beautiful to look at.

The surface counteracts and hides scratches.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and will therefore easily be put in the bag without it lying around and getting wet.

With a stainless steel thermos drinking bottle from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish (like this one). They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel Dark Grey.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Soft Rose

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated. It gives a true look and a more durable colour.

The drinking can fits perfectly in a cup holder.

The drinking bottle can hold 350 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 17.8cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 227 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can damage the dentherm capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also findhere.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is made of pure stainless steel.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will thus not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking bottle can be cleaned by hand - possibly with this bottle cleaner.

This stainless steel drinking bottle is from Danish AYA&IDA.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the go.

The drinking bottle is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle can hold 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

Also available in 500 ml. in 4 beautiful colors - and in 1 liter in the color Cool Grey.

The drinking can is not suitable for a trip in the dishwasher, as this can damage the dentherm capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also findhere.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel drinking bottle is from Danish AYA&IDA.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the go.

The drinking bottle is produced in food-approved stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely tight.

The drinking bottle can hold 1 liter - and does not take up much space despite having a thermo effect.

The drinking bottle measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426g.

Also available in 500 ml. in 4 beautiful colors - and in 750ml. in 3 beautiful colors.

The drinking bottle is not suitable for a trip in the dishwasher, as this can damage the thermal capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Black Marble (Satin Finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Rose Gold (Glossy Finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Little Buds (Satin Finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and will therefore easily be put in the bag without it lying around and getting wet.

With a stainless steel thermos drinking bottle from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25cm. in height and 8.4 cm. in diameter. It weighs 360g.

The drinking bottle can be cleaned by hand - possibly with this bottle cleaner.

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Cream Beige

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The Cream Beige color is powder coated. It gives a rough look and a more durable colour.

The drinking can fits perfectly in a cup holder.

The drinking bottle can hold 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The color is Cream Beige.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

You therefore don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed. In addition, the lid has a silicone ring on the outside, which makes it easier to get a grip on the lid.

The color is powder coated. It gives a true look and a more durable colour.

The drinking bottle can contain 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can damage the dentherm capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also findhere.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Mint Green

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can hold 350 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 17.8 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 227 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Best thermos drinking bottle from Klean Kanteen

Klean Kanteen thermos drinking bottle in stainless steel.

This drinking bottle can hold most things. And then it is made of one of the absolute cleanest materials to store your drinks in.

With this drinking bottle you are sure that no harmful chemicals are transferred to your drinking water.

Stainless steel does not give off any aftertaste nor does it take on the taste of your drinks.

And then the drinking bottle has a thermo function and can keep the water cold for 63 hours and hot for 24 hours.

That's it insanely smart on a hot summer's day - and in general, where you can always just leave your water bottle in your bag. It keeps cold and hot in itself - without forming condensation.

The drinking can can hold 592 ml. and has a screw lid

This thermos drinking bottle is in the color Black

The color is spray painted with Klean Kanteen's Clean Coat, which is a very durable coating.

The color is matte in its expression.

The screw lid is made of BPA-free polypropylene and with a stainless steel handle.

With the handle you can easily attach the drinking bottle to the bag, the belt or the pushchair.

The drinking bottle is designed to last a lifetime. Therefore, you can mix lids as needed and possibly also buy a sports lid or a screw lid in pure stainless steel for it.

Maintenance of your Klean Kanteen drinking bottle

We recommend that you wash the thermos drinking bottle by hand. Both the color and the thermal function can be damaged by the dishwasher.

If necessary, use this ingenious bottle cleaner for washing up your drinking bottle by hand.

If your Klean Kanteen drinking bottle is well used, lime deposits can also accumulate in it. You can easily get rid of them with natural and effective descaling like this one

The drinking can measures 26.2 cm. in height and 7.3 cm. in diameter.

The opening measures 4.4 cm. in diameter

The drinking can weighs 349 gr.

See our huge selection from Klean Kanteen just here

Aya&Ida's drinking bottle keeps your water cold all day

The color is Matte Black

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense either inside or outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can hold 350 ml. and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 17.8 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 227 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Clima Bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This drinking bottle is in the color Tuxedo Black (Stone Finish)

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Blur

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

Materials and function

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-grade silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavors from the drinks that have been in it. den.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking jug has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking jug measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

Maintenance of your 24Bottles Clima drinking bottle

The drinking bottle should be cleaned by hand after each use.

If necessary, use this bottle cleaner together with warm water. It is especially important to clean your 24Bottles drinking bottle after each use if you have used it for anything other than water.

Use a mild washing-up liquid as well. We recommend this version with probiotic bacteria from Danish Byoms

Set your bottle to dry afterwards. First, leave the bottle upside down and without the cap. Then you can turn the bottle over so that the last moisture can dry up.

See our huge selection from 24Bottles just here

Clima Bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This drinking bottle is in the color Begonia

This drinking bottle can hold 850 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will thus not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 25 cm. in height and 8.4 cm. in diameter. It weighs 360 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, even if there are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone (like this), Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

AYA&IDA drinking bottle

This stainless steel drinking bottle is from Danish AYA&IDA.

It is made of pure stainless steel and in the color Light Grey

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking can is produced in food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has silicone seal which ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 330 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal effect as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Aya&Ida's drinking bottle keeps your water cold all day

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Cream Beige

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense either inside or outside.

So use it for cold water, juice, coffee or tea when you're on the move.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated on. It gives a rough look and a more durable colour.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can hold 350 ml. and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 17.8 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 227 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Aya&Ida's drinking bottle keeps your water cold all day

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Driftwood

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense either inside or outside.

So use it for cold water, juice, coffee or tea when you're on the move.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated on. It gives a rough look and a more durable colour.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can hold 350 ml. and does not take up much space despite having a thermal effect.

The drinking jug measures 17.8 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 227 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Specifications
Capacity: 500 ml
Material: 18/8 stainless steel
Dimensions: H 20.5 cm x Ø 7.3 cm
Mouth opening: Ø 3.3 cm
Weight: 274 g
Colour: Bloom Bloom Pink

Care
Hand-wash recommended: warm water + mild soap. Alternatively, warm water with vinegar or 1 tsp baking soda. Dry upside down without the lid after washing.

Cleaning
We recommend washing the bottle itself by hand to maintain the thermal effect and finish. The lid is dishwasher safe.

Specifications

• Capacity: 950 ml

• Material: Stainless steel 18/8, PP plastic, and silicone (Lid)

• Dimensions: Ø8.7 cm x 24.5 cm

• Weight: 403 g

• Color: Cream Beige

Cleaning
We recommend washing the bottle itself by hand to maintain the thermal effect and finish. The lid is dishwasher safe.

Specifications

• Capacity: 950 ml

• Material: Stainless steel 18/8, PP plastic, and silicone (Lid)

• Dimensions: Ø7.5 cm x 26 cm

• Weight: 362 g

• Color: Soft Rose

Cleaning
We recommend washing the bottle itself by hand to maintain the thermal effect and finish. The lid is dishwasher safe.

Specifications

• Capacity: 700 ml

• Material: Stainless steel 18/8, PP plastic, and silicone (Lid)

• Dimensions: Ø7.5 cm x 26 cm

• Weight: 362 g

• Color: Tropical Green

Cleaning
We recommend washing the bottle itself by hand to maintain the thermal effect and finish. The lid is dishwasher safe.

Specifications

• Capacity: 950 ml

• Material: Stainless steel 18/8, PP plastic, and silicone (Lid)

• Dimensions: Ø7.5 cm x 26 cm

• Weight: 362 g

• Color: Driftwood

Benefits and Features

• 100% plastic-free: No paint, ink, coatings, or plastic.
• Great materials: Made of 90% recycled steel and certified bamboo.
• Superior insulation: Keeps content cold for up to 50 hours (iced) and warm for up to 16 hours.
• Health-focused: Free from BPA, PFAS, and lead.
• Durable construction: Equipped with an "impact base cap" that protects the bottom from bumps.
• Easy maintenance: The bottle itself is dishwasher safe (the bamboo lid must be hand washed).

Specifications

• Capacity: 473 ml (16 oz)
• Weight: 416.7 g
• Dimensions: 243.8 mm (H) x 76.2 mm (W)
• Opening: 44 mm
• Material: 90% recycled 18/8 stainless steel

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Tropical Green.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is produced in food-grade stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The drinking bottle can hold 1 liter - and does not take up much space despite that it has a thermal effect.

The drinking can measures 31.5 cm. in height and 7.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 426 gr.

Also available in 500 ml. in 4 beautiful colors - and in 750 ml. in 3 beautiful colors.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

AYA&IDA drinking bottle

Stainless steel drinking bottle is from Danish AYA&IDA.

This version is in the color Cool Grey.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor on the outside.

So use it for cold water, juice, coffee or tea when you're on the go.

The drinking bottle is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking bottle is completely sealed.

The drinking bottle fits perfectly in a cup holder.

The drinking bottle can contain 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

This stainless steel thermal drinking bottle is from Danish AYA&IDA.

The color is Mint Green and is a light blue-green color.

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the go.

The drinking can is made of food-approved stainless steel 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you don't have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated. It gives a true look and a more durable colour.

The drinking bottle can contain 750 ml. - and does not take up much space despite the fact that it has a thermal effect.

The drinking can measures 28.5 cm. in height and 7 cm. in diameter. The opening measures 3.6 cm.

Weight: 360 gr.

Also available in 500 ml. in 4 beautiful colors - and in 1 liter in the color Cool Grey.

The drinking can is not suitable for a trip in the dishwasher, as this can damage the dentherm capacity as well as the self-coating and the lid. Therefore, it is recommended that it be washed by hand, for example with a bottle cleaner, which you can also findhere.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Sage.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Atlantic Bay (Stone Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a lot of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the color Atlantic Bay (Stone Finish)

This drinking bottle can hold 330 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 15 cm. in height and 7.3 cm. in diameter. It weighs 202 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color/design Rover - Deep Blue (Stone Finish)

The drinking bottle has a rustic finish, but still shiny.

The finish is the most durable from 24 Bottles. It is both extra strong and at the same time extremely beautiful to look at.

The surface counteracts and hides scratches.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and will therefore easily be put in the bag without it lying around and getting wet.

With a stainless steel thermos drinking bottle from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Pink Marble (Satin Finish)

This drinking bottle can hold 330 ml. and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 15 cm. in height and 7.3 cm. in diameter. It weighs 202 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the Tivoli design (Satin Finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

Thermo drinking bottle in stainless steel from 24 Bottles.

This version is in the design Riace (Satin Finish)

This drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking can does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

If you want the paintwork to be scratch-free, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not impart flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The drinking can should be cleaned by hand - possibly with this bottle cleaner.

This stainless steel drinking bottle is from Danish AYA&IDA.

The color is Soft Rose

The drinking bottle has a thermo effect and can keep your drinks cold for 24 hours and hot for 12 hours.

And the drinking bottle does not condense - neither inside nor outside.

So use it for cold water, juice, coffee or tea when you are on the speed.

The drinking can is made of food-grade stainless steel - 18/8 and also has stainless steel in the lid, which means that your drinks only come into contact with stainless steel.

Therefore, you do not have to worry about BPA, hormone-disrupting substances or other harmful chemicals.

The lid has a silicone seal that ensures that the drinking can is completely sealed.

The color is powder coated. It gives a rough look and a more durable colour.

The drinking can fits perfectly in a cup holder.

The drinking bottle can hold 500 ml. - and does not take up much space despite having a thermal effect.

The drinking can measures 23.5 cm. in height and 6.7 cm. in diameter. The opening measures 3.6 cm.

Weight: 290 gr.

The drinking can is not suitable for a trip in the dishwasher, as this can destroy the thermal capacity as well as the coating and the lid itself. It is therefore recommended that it be washed by hand, for example with a bottle cleaner, which you can also find here.

Be aware that the drinking bottle is not 100% plastic-free. There is a small bit of plastic inside the lid itself, but the plastic is coated with stainless steel, so your drinks will not come into contact with the plastic.

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the color Aqua Green (Satin Finish)

The surface is matt and durable and provides a good grip on the bottle.

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a thermos drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it pick up flavor from the drinks that have been in it.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that, on the contrary, absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They won't get scratched.

For the 24Bottles Urban bottles, you can also choose to use a thermo cover, which in addition to holding cold and heat will also protect against scratches.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Camo Zone (Satin Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with an insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.

Clima drinking bottle from 24Bottles

Thermo drinking bottle in stainless steel from 24Bottles.

This version is in the design Green Marble (Glossy Finish)

The drinking bottle can hold 0.5 liters and is made of two-layer stainless steel with insulating effect.

A drinking bottle from 24Bottles will save you a multitude of plastic bottles. And at the same time, it will keep your drinks cold for 24 hours or hot for 12 hours.

The drinking bottle does not condense on the outside and can therefore easily be put in the bag without it lying around and getting wet.

With a Clima drinking bottle in stainless steel from 24Bottles you completely avoid plastic. The lid of the drinking bottle is also made of stainless steel - only a small ring of food-approved silicone has been added to keep the drinking bottle tight.

Your drinks will therefore not come into contact with anything other than stainless steel, which is one of the absolute cleanest materials for both your hot and cold drinks.

Stainless steel does not give off flavor to your drinks, nor does it take on flavors from the drinks that have been in it.

The drinking bottle from 24 Bottles is Co2 neutral.

24Bottles makes sure to compensate for the Co2 used in connection with the production of the drinking bottle by planting trees that absorb Co2. The trees are currently planted in Italy, Mexico and Nepal.

The drinking can has a screw lid and a relatively wide opening, which makes it easy to put ice cubes, frozen fruit and other things in the drinking bottle.

The drinking can measures 20.5 cm. in height and 7.3 cm. in diameter. It weighs 274 gr.

The bottles and cups from 24Bottles with the many colorful patterns may get normal wear or patina over time, after e.g. to have been in the bag. However, this does not affect the quality at all, not even if they are definite dents.

If you want to avoid scratches in the paintwork, we recommend finding a color you like from those that have a Stone, Steel or Hammertone Finish. They will not be scratched.

The drinking bottle should be cleaned by hand - possibly with this bottle cleaner.