Shaving set with Safety Razor - Rytmo - Ash
Related products
Related products
Leaf razor starter kit - Silver
Leaf ShaveLSH-10039
Leaf Shave a completely plastic-free product that can save you and the environment a whole lot of expensive disposable razors.
This Leaf Shave Razor is in the colour SILVER
It has a glossy finish. And clearly one of the most durable colors there is.
Leaf Shave is simple to use. You can use it for the whole body - including the intimate zones and it is suitable for both men and women.
Leaf Shave can be equipped with up to 3 single-edge blades, which give you a very close shave.
For sensitive skin or areas - for example intimate shaving, we recommend that you only load your Leaf Shave with the top 2 blades.
How to use your Leaf Shave
- Prepare your skin for shaving by washing with warm water and possibly light exfoliation. It makes the hairs softer and easier to shave.
- Use a good shaving soap. We can definitely recommend this from Isangs.
- Shave with your Leaf Shave. Both skin and razor should be moist when you start.
- You don't need to put extra pressure on the Leaf razor, just let the weight of the razor do the work
- If you think the Leaf razor is too aggressive, you can remove the lower razor blade
- Continuously rinse your Leaf Shave under warm water.
- Notice if you need to shave areas and repeat if necessary.
- Shaving done!
Cleaning your Leaf razor
Open your Leaf Shave and rinse it thoroughly after each use. Use possibly an old toothbrush if there are places where dirt is stuck.
Make sure the leaves are cleaned and have a chance to dry up.
Store your Leaf Shave in a dry place.
If there is limescale on your Leaf Shave, you can soak it in 1 part vinegar and 2 parts water for approx. 10 minutes.
Scrub it if necessary. clean with an old toothbrush and a little mild dishwashing detergent
Do not leave the safety razor soaked for a long time.
How to change the blades on your Leaf Shave
Your Leaf Shave can be equipped with up to 3 leaves. The blades are Single-Edge blades and you can find them here
- When you want to change the blades, you start by unscrewing the screw on the head of the Leaf razor. You have to screw clockwise to open it.
- The loose screw opens the razor blades, which you can now access.
- Replace the razor blades one by one.
- Make sure the blades are in the correct position in each compartment.
- Take care when handling the razor blades. They are really sharp!
- Turn the screw back in place - counter-clockwise. (see video further down the page)
If you want your Leaf Shave standing free, you can buy this brilliant holder for it.
The Leaf Shave razor is produced in Taiwan.
Packaging: The Leaf Shave razor comes in a cardboard box, which can be recycled together with your other cardboard waste
Note: The lifetime guarantee does not apply to the coating, which can develop a patina over time.
See the entire range from Leaf Shave hereSee our big guide on Safety Razors right here.
128.70 €
Leaf razor starter kit - Chrome
Leaf ShaveLSH-10008
Leaf Shave a completely plastic-free product that can save you and the environment a whole lot of expensive disposable razors.
This Leaf Shave Razor is in the colour CHROME
It has a glossy finish. And clearly one of the most durable colors there is.
Leaf Shave is simple to use. You can use it for the whole body - including the intimate zones and it is suitable for both men and women.
Leaf Shave can be equipped with up to 3 single-edge blades, which give you a very close shave.
For sensitive skin or areas - for example intimate shaving, we recommend that you only load your Leaf Shave with the top 2 blades.
How to use your Leaf Shave
- Prepare your skin for shaving by washing with warm water and possibly light exfoliation. It makes the hairs softer and easier to shave.
- Use a good shaving soap. We can definitely recommend this from Isangs.
- Shave with your Leaf Shave. Both skin and razor should be moist when you start.
- You don't need to put extra pressure on the Leaf razor, just let the weight of the razor do the work
- If you think the Leaf razor is too aggressive, you can remove the lower razor blade
- Continuously rinse your Leaf Shave under warm water.
- Notice if you need to shave areas and repeat if necessary.
- Shaving done!
Cleaning your Leaf razor
Open your Leaf Shave and rinse it thoroughly after each use. Use possibly an old toothbrush if there are places where dirt is stuck.
Make sure the leaves are cleaned and have a chance to dry up.
Store your Leaf Shave in a dry place.
If there is limescale on your Leaf Shave, you can soak it in 1 part vinegar and 2 parts water for approx. 10 minutes.
Scrub it if necessary. clean with an old toothbrush and a little mild dishwashing detergent
Do not leave the safety razor soaked for a long time.
How to change the blades on your Leaf Shave
Your Leaf Shave can be equipped with up to 3 leaves. The blades are Single-Edge blades and you can find them here
- When you want to change the blades, you start by unscrewing the screw on the head of the Leaf razor. You have to screw clockwise to open it.
- The loose screw opens the razor blades, which you can now access.
- Replace the razor blades one by one.
- Make sure the blades are in the correct position in each compartment.
- Take care when handling the razor blades. They are really sharp!
- Turn the screw back in place - counter-clockwise. (see video further down the page)
If you want your Leaf Shave standing free, you can buy this brilliant holder for it.
The Leaf Shave razor is produced in Taiwan.
Packaging: The Leaf Shave razor comes in a cardboard box, which can be recycled together with your other cardboard waste
Note: The lifetime guarantee does not apply to the coating, which can develop a patina over time.
See the entire range from Leaf Shave hereSee our big guide on Safety Razors right here.
128.70 €
Mühle stand for safety razor and shaving brush - Traditional
MühleMÜH-13142
How to use
Rinse brush and razor in clean water, shake off excess, and hang them in the stand (brush bristles down).
Allow to air-dry between shaves.
Material & finish
Solid brass, high-gloss chrome plated (corrosion resistant, easy to wipe clean).
39.90 €
Shaving set from German Mühle, which has been known for their high quality since 1945.
The shaving set contains Safety Razor, shaving brush (Pure Badger) and holder.
This shaving set is from Mühle's RYTMO series and is in beautiful dark ash wood.
The series is simple and clean and has a handle on both Safety Razor and shaving brush is made of ash wood.
The set is for those who want a good shave - and at the same time save the environment from unnecessary disposable plastic.
The set consists of:Safety RazorA Safety Razor is for those who want a good shave - and at the same time save the environment from unnecessary disposable plastic.
This safety razor ensures you a close shave without red and irritated skin.
It will take you a few more minutes to shave, but you will really love it in the long run.
Shaving brushThe bristles of the brush itself are handmade Pure Badger.
Pure badger is good quality natural badger hair.
The brush is soft and great to work with.
This shaving brush has a knot size of 21mm, which is equivalent to a size Medium.
HolderYour Mühle shaving brush should preferably dry upside down. This will ensure that it dries up properly and that it keeps its shape.
And your Safety Razor gets dull lying without protection, so it also benefits from hanging in a holder.
For this purpose, Mühle has made this smart holder, where everything can be assembled and decorated in your bathroom.
How do you use a Safety Razor?
Have you tried a safety Sazor - or a DE scraper like this one, you'll probably just have to get used to using it. And your skin probably needs it too.
But follow this procedure - and you're pretty much on your way:
- Moisten skin and beard/hair with warm water
- Use shaving foam or a shaving brush and lather it up well - possibly. with a brush
- Check your scraper and make sure the scraper head and handle are not loose. However, only tighten the screw if it is loose. Then you are sure that the blade is at the right angle
- Start your shave and hold the scraper at a 30 degree angle to the skin
- Let the scraper slide over the skin with light pressure
- Shave only in the direction of the hairs - not against the hairs
- Tighten the skin in places where it can be difficult to get a flat surface - e.g. on the neck
For this scraper you can use all classic razor blades. For example these from Mühle.
If you need to take your razor on holiday, it is a really good idea to protect it (and everything around it) with this blade protector.
See our big guide on Safety Razors just here.Reviews
There are no reviews of this product.
Login