Puer - bleach & stain remover - 1 kg
Related products
Related products
Gall soap stain remover block
Tierra VerdeTIV-11995
How to use gall soap
Wet the area with the stain, apply the soap and rub it in. The rubbing should be adapted to the material - a silk blouse is less tolerant than jeans. Leave on for approx. 15 minutes, then rinse thoroughly or wash the entire garment. If the stain is not completely gone, repeat the process.
NOTE: Protein-containing stains (blood, dairy products) must be pre-treated in cold water before washing. Proteins coagulate in hot water and cannot then be removed.
There is a white coating on the soap - is it spoiled?
A possible white coating on the surface of the soap is harmless - it is sodium chloride (salt).
The soap looks different than usual - is it okay?
The color and scent can be affected by the raw materials used and the maturation time. However, these differences have no effect on the functionality of the product.
3.70 €
3.00 €
Degreaser with citrus - 750 ml spray
Tierra VerdeTIV-13609
Use
- Shake the bottle before use
- Spray directly on the desired surface
- Dry with a cloth or sponge
- For stubborn dirt: leave for a few minutes before wiping
- On textiles: Test color fastness first – apply to the stain, leave to act and then wash as usual
Ingredients
- <5% non-ionic surfactant of vegetable origin
- D-limonene (natural from orange peel)
- Sodium benzoate (preservative approved for organic cleaning products)
7.60 €
6.10 €
Stain remover with probiotics - pretreatment spray - 160 ml
ByomsBYO-01160
How to use the stain remover
Spread the foam on the stain, let it work and scrub gently with a damp brush. Let the stain remover work for at least 5 minutes before washing. For particularly stubborn stains, the treatment can be extended by storing the textile in a closed plastic bag for up to 12 hours.
Ingredients
- 5-15% plant-based anionic surfactants
- 5-15% plant-based non-ionic surfactants
- <5% plant-based amphoteric surfactants
- Denatured ethanol
- Citric acid
- Preservative (2-phenoxytethanol)
- Microorganisms.
16.60 €
PUER - stain remover and bleach
Do you know Puer?
A really effective and versatile product.
Puer is an oxygen-based bleach and stain remover - which also degreases and disinfects.
This bag contains 1 kg.
What can you use puer for?
Puer can be used for so many different things in the household.
For example, use it as:
- Bleach when you wash white - add 1-2 tbsp. together with your detergent
- Soaking very dirty clothes (white and colourfast) - 1-2 tbsp. for 10 liters of water
- Cleaning the toilet - pour puer into the toilet together with boiling water and leave to work overnight. Then scrub clean with the toilet brush
- Cleaning drains - pour 1-2 tbsp. Puer down the drain (preferably with vinegar). It dissolves greasy deposits. Leave on for at least 15 minutes
Puer or sodium percarbonate is oxygen-enriched washing soda (sodium carbonate). When activated with hot water, oxygen is released and hydrogen peroxide is formed, which has a bleaching effect. The hydrogen atmosphere also has a disinfecting effect.
Puer breaks down into water and oxygen with a lot of fizz and foam, so it is completely biodegradable.
For Puer to work properly, it must be used with water with a temperature of at least 40 degrees. The powder does not dissolve or activate in cold water.
Reviews
There are no reviews of this product.
Login