Natural stain removal

PUER - stain remover and bleach

Do you know Puer?

A really effective and versatile product.

Puer is an oxygen-based bleach and stain remover - which also degreases and disinfects.

This bag contains 1 kg.

What can you use puer for?

Puer can be used for so many different things in the household.

For example, use it as:

• Bleach when you wash white - add 1-2 tbsp. together with your detergent
• Soaking very dirty clothes (white and colourfast) - 1-2 tbsp. for 10 liters of water
• Cleaning the toilet - pour puer into the toilet together with boiling water and leave to work overnight. Then scrub clean with the toilet brush
• Cleaning drains - pour 1-2 tbsp. Puer down the drain (preferably with vinegar). It dissolves greasy deposits. Leave on for at least 15 minutes

Puer or sodium percarbonate is oxygen-enriched washing soda (sodium carbonate). When activated with hot water, oxygen is released and hydrogen peroxide is formed, which has a bleaching effect. The hydrogen atmosphere also has a disinfecting effect.

Puer breaks down into water and oxygen with a lot of fizz and foam, so it is completely biodegradable.

For Puer to work properly, it must be used with water with a temperature of at least 40 degrees. The powder does not dissolve or activate in cold water.

This stain remover block is both natural and effective.

It removes stains from your clothes, while being gentle on the environment.

The stain remover block is made from natural plant-based oils and is therefore biodegradable in nature. And then it is a completely vegan alternative.

The stain remover box contains saponified coconut oil, rapeseed oil, soya oil and lychee oil.

The lychee oil gives the stain remover a fantastic scent of citrus.

The lychee oil is antibacterial, but be aware that it contains essential oils, which can be allergenic.

The stain remover also contains borax, which effectively removes dirt and stains.

How to use the stain remover block?

Wet your stained clothes and rub the stain remover block on the stain until the soap suds have reached through the fabric and there are soap suds on both sides.

Let the stain remover work for 10 minutes, after which you can wash the clothes as normally.

For difficult stains such as berries or older stains, it may be necessary to use the stain remover more than once and possibly soak with the stain remover foam.

Contains 60 gr.

Ingredients:

Saponified oils of coconut, canola and vegetable soya, Litsea cubeba oil and borax.

With our range of natural & chemical-free laundry products you can create a good washing routine, which is both gentle on the clothes, the skin and the environment. Økofamily's selection makes it possible to get clean, fresh and fragrant clothes without using synthetic substances. From natural detergents and stain removers to durable clothespins and fragrance oils – our range supports healthy and natural laundry.

See the entire Cocoon Company collection

Use

• Shake the bottle before use
• Spray directly on the desired surface
• Dry with a cloth or sponge
• For stubborn dirt: leave for a few minutes before wiping
• On textiles: Test color fastness first – apply to the stain, leave to act and then wash as usual

Ingredients

• <5% non-ionic surfactant of vegetable origin
• D-limonene (natural from orange peel)
• Sodium benzoate (preservative approved for organic cleaning products)

How to use the stain remover
Spread the foam on the stain, let it work and scrub gently with a damp brush. Let the stain remover work for at least 5 minutes before washing. For particularly stubborn stains, the treatment can be extended by storing the textile in a closed plastic bag for up to 12 hours.

Ingredients

• 5-15% plant-based anionic surfactants
• 5-15% plant-based non-ionic surfactants
• <5% plant-based amphoteric surfactants
• Denatured ethanol
• Citric acid
• Preservative (2-phenoxytethanol)
• Microorganisms.

Bile soap - 250 ml.

The world's best and completely natural stain remover.

Bile soap is basically super sticky. It contains washing active substances from coconut oil and plant soaps - and then it contains bile extract. It smells bad (of course), but it works!

Officially it works on grease, starch and egg white stains, but at home it also works fantastically on most other stains: tomato, colorful berries and indefinable kindergarten stains. Of course, only if the stain is treated relatively soon after it has appeared.

Bile soap is applied directly to the stain and should preferably be left to work for a minimum of 10 minutes. You can also wash an entire machine with 35 ml. bile soap without additional detergents

Content5-15% nonionic surfactants*
5-15% anionic surfactants*
<5% soaps
Bile extract from cattle
Water
* surfactants of vegetable origin. See tips and tricks for cleaning in our large cleaning guide and our large laundry guide here.

With our range of natural & chemical-free laundry products you can create a good washing routine that is both gentle on the clothes, the skin and the environment. Økofamily's selection makes it possible to get clean, fresh and fragrant clothes without using synthetic substances. From natural detergents and stain removers to durable clothespins and fragrance oils – our range supports healthy and natural laundry.

PUER - stain remover and bleach

Do you know Puer?

A really effective and versatile product.

Puer is an oxygen-based bleach and stain remover - which also degreases and disinfects.

This bag contains 1 kg.

What can you use puer for?

Puer can be used for so many different things in the household.

For example, use it as:

• Bleach when you wash white - add 1-2 tbsp. together with your detergent
• Soaking very dirty clothes (white and colourfast) - 1-2 tbsp. for 10 liters of water
• Cleaning the toilet - pour puer into the toilet together with boiling water and leave to work overnight. Then scrub clean with the toilet brush
• Cleaning drains - pour 1-2 tbsp. Puer down the drain (preferably with vinegar). It dissolves greasy deposits. Leave on for at least 15 minutes

Puer or sodium percarbonate is oxygen-enriched washing soda (sodium carbonate). When activated with hot water, oxygen is released and hydrogen peroxide is formed, which has a bleaching effect. The hydrogen atmosphere also has a disinfecting effect.

Puer breaks down into water and oxygen with a lot of fizz and foam, so it is completely biodegradable.

For Puer to work properly, it must be used with water with a temperature of at least 40 degrees. The powder does not dissolve or activate in cold water.

How to use gall soap
Wet the area with the stain, apply the soap and rub it in. The rubbing should be adapted to the material - a silk blouse is less tolerant than jeans. Leave on for approx. 15 minutes, then rinse thoroughly or wash the entire garment. If the stain is not completely gone, repeat the process.

NOTE: Protein-containing stains (blood, dairy products) must be pre-treated in cold water before washing. Proteins coagulate in hot water and cannot then be removed.

There is a white coating on the soap - is it spoiled?
A possible white coating on the surface of the soap is harmless - it is sodium chloride (salt).

The soap looks different than usual - is it okay?
The color and scent can be affected by the raw materials used and the maturation time. However, these differences have no effect on the functionality of the product.