Safety Razor

How do you use a Safety Razor?
If you haven't tried a safety razor - or a DE scraper like this one, then you probably just have to get used to using it. And your skin probably needs to too.

But follow this procedure - and you're pretty much on your way:
 

• Moisten skin and beard/hair with warm water
• Use shaving foam or a shaving brush and lather it up well - possibly. with a brush
• Check your scraper and make sure the scraper head and handle are not loose. However, only tighten the screw if it is loose. Then you are sure that the blade is at the right angle
• Start your shave and hold the scraper at a 30 degree angle to the skin
• Let the scraper slide over the skin with light pressure
• Shave only in the direction of the hairs - not against the hairs
• Tighten the skin in places where it can be difficult to get a flat surface - e.g. on the neck

Can a Safety Razor also be used by women?
The short answer is: YES!

The Safety Razor also works well for shaving on the body.

Even though Mühle's leaflet says that it should only be used on the face. But Mühle's products are sold all over the world, so they have probably chosen to be extra careful with their recommendations for that reason. As long as you are careful with the shave, just as you would be if it were on the face, then you can easily use it on the body too.

See our big guide on Safety Razors just here.

How to get the best result

1. Wet the skin thoroughly (ideally after a shower).
2. Lather shaving soap/cream and massage in.
3. Keep roughly a 30° angle, use light pressure, shave with the grain.
4. Rinse the razor head often.
5. Finish with cold water and a mild aftershave.

How to use your Companion razor

1. Insert a standard DE blade.
2. Hold at about 30-50° to the skin and use light pressure - let the weight do the work.
3. Shave with the grain, rinse often, and hang to dry by the cord.

Specifications

• Type: Closed-comb DE safety razor (unisex, face & body)
• Material: Metal, satin finish; cotton cord (grey, replaceable)
• Dimensions: Length 112 mm; head width 49 mm; handle 105 mm
• Blades: Fits all standard DE blades
• Made in: Germany

Leaf Shave's The Twig - for a controlled and plastic-free shave

The Twig is Leaf Shave's brilliant take on a classic Safety Razor.

However, The Twig only has a razor blade on one side - and is therefore a Single-Edge razor.

It will give you a close and smooth shave and can feel as if the hairs/stubs are simply wiped off the skin.

It makes it easy to get into armpits and the like, as it doesn't take up much space.

And then The Twig is also a completely plastic-free product, which can save you and the environment a whole lot of expensive disposable scrapers.

The Twig is simple to use. You can use it all over your body and it's suitable for both men and women.

How to use The Twig
Prepare your skin for shaving by washing with warm water. It makes the hairs softer and easier to shave.

• Use a good shaving soap. We would definitely recommend this one from Isangs with Eucalyptus
• Shave with The Twig. Both skin and razor should be moist when you start.
• You don't need to put extra pressure on The Twig, just let the weight of the razor do the work
• Continuously rinse The Twig under warm water.
• Notice if you need to shave any areas and repeat
• And then you're done and freshly shaved!

Cleaning this Leaf shave razor

Open The Twig and rinse thoroughly after each use. Use possibly an old toothbrush if there are places where dirt is stuck.

Make sure the blade is cleaned and has a chance to dry up.

Store The Twig in a dry place.

If you want your Leaf Shave razor standing free, you can buy this brilliant holder for it.

If there is limescale on The Twig, you can soak it in 1 part vinegar and 2 parts water for approx. 10 minutes.

Scrub it if necessary. clean with an old toothbrush and a little mild washing-up liquid

Do not leave the safety razor soaked for a long time.

How to change blades on The Twig

Your Leaf Shave must be supplied with 1 Single-Edge razor blade. You can find the razor blades here

• When you want to change the blades, you start by unscrewing the base on the shaft of The Twig. You have to screw clockwise to open it.
• The screw at the bottom opens the razor blade at the top, which you can now access.
• Replace the razor blade
• Make sure the blade is in the right position
• Be careful when handling the razor blade. It's really sharp!
• Turn the base back into place - anti-clockwise. (see video further down the page)

Leaf Shave's The Twig is produced in China

How do you use a Safety Razor?
If you haven't tried a safety razor - or a DE scraper like this one, then you probably just have to get used to using it. And your skin probably needs to too.

But follow this procedure - and you're pretty much on your way:
 

• Moisten skin and beard/hair with warm water
• Use shaving foam or a shaving brush and lather it up well - possibly. with a brush
• Check your scraper and make sure the scraper head and handle are not loose. However, only tighten the screw if it is loose. Then you are sure that the blade is at the right angle
• Start your shave and hold the scraper at a 30 degree angle to the skin
• Let the scraper slide over the skin with light pressure
• Shave only in the direction of the hairs - not against the hairs
• Tighten the skin in places where it can be difficult to get a flat surface - e.g. on the neck

Can a Safety Razor also be used by women?
The short answer is: YES!

The Safety Razor also works well for shaving on the body.

Even though Mühle's leaflet says that it should only be used on the face. But Mühle's products are sold all over the world, so they have probably chosen to be extra careful with their recommendations for that reason. As long as you are careful with the shave, just as you would be if it were on the face, then you can easily use it on the body too.

See our big guide on Safety Razors just here.

How to use a DE safety razor

• Soften the hairs with warm water.
• Lather up with shaving soap or gel.
• Maintain an angle of about 30° and use very light pressure – let the weight do the work.
• Start in the direction of the hair; rinse frequently.
• If necessary, take an extra light pass across.
• Rinse and dry the razor after use.
• Replace the blade regularly for best results.

Compatibility
The razor fits all standard DE razor blades.

Replacing blades
Replace the razor blade after every 5-10 shaves for optimal sharpness and comfort. Extend the life of the razor by drying the razor and blade in a towel after use.

How to use a DE safety razor

• Soften the hairs with warm water.
• Lather up with shaving soap or gel.
• Maintain an angle of about 30° and use very light pressure – let the weight do the work.
• Start in the direction of the hair; rinse frequently.
• If necessary, take an extra light pass across.
• Rinse and dry the razor after use.
• Replace the blade regularly for best results.

Compatibility
The razor fits all standard DE razor blades.

Replacing blades
Replace the razor blade after every 5-10 shaves for optimal sharpness and comfort. Extend the life of the razor by drying the razor and blade in a towel after use.

Materials & Craftsmanship

Olive wood has been valued since antiquity for its strength and warm character. Blanks are carefully dried, turned, sanded and sealed with oil, creating a silky sheen and water-repellent surface. Chrome metal parts underline the line’s clean design language. All made in Germany.

How to get the best shave with a safety razor

1. Thoroughly moisten the skin (ideally after a shower).
2. Whip up shaving soap/cream with the brush and massage in.
3. Hold the razor at about 30° to the skin; use very light pressure and shave with the grain.
4. Rinse the razor head frequently.
5. Finish with cold water and a mild aftershave.

Care

• Rinse brush and razor in clean water; shake off excess.
• Hang on the stand to air-dry (helps the wood keep its shape and finish).
• Apply a drop of oil to the wood as needed.

Specifications

• Series: KOSMO – Olive wood (oiled).
• Razor: DE safety razor, closed comb (fits all standard double-edge blades). Dimensions: 112 × 42 mm.
• Shaving brush: Fine Badger (badger hair) 21 mm (Medium). Dimensions: 110 × 35 mm.
• Stand: Chrome – holds both brush and razor.
• Made in: Germany.

Use

1. Unscrew your current head from the handle.
2. Fit the open-comb head and snug it down.
3. Insert a standard DE blade.
4. Shave with a light touch and a low angle (~30°). Note the increased aggression.

Recommendation
Suited to experienced users and facial shaving; excellent for dense growth and 2-5 days’ stubble.

Technical design and performance
Leaf Shave The Twig is constructed to make the transition from multi-blade system razors to safety razors as smooth as possible.

The handle is back-weighted, providing natural balance in the hand and ensuring that the weight of the razor itself delivers the necessary pressure against the skin. Therefore, you should not press down, but simply let the razor glide over the skin.

The difference between The Twig and its sister model Thorn lies in the "blade gap," i.e., the distance between the blade and the safety bar. The Twig has a smaller gap, resulting in a milder shave that effectively removes hair without being aggressive toward the skin.

How to use The Twig To achieve the best result, it is recommended to prepare the skin thoroughly.
 

• Preparation: Wash the area with warm water to soften the hairs and open the pores.
• Soap: Apply a high-quality shaving cream or shaving soap to ensure good glide.
• Shaving: Hold The Twig against the skin (the angle is preset). Let the weight of the razor do the work without applying extra pressure.
• Rinsing: Rinse the razor continuously under warm water to remove hair and soap residue.

Changing razor blades
The Twig uses standard halved DE blades (Single-Edge). The razor is delivered including 60 pcs Leaf Shave Single-Edge blades.
 

1. Turn the bottom of the handle clockwise to open the head.
2. Lift off the top plate. The built-in magnet will help hold or catch the old blade.
3. Place a new blade on the head. The magnet ensures it sits correctly.
4. Close the head and turn the bottom counter-clockwise to lock the razor.

Cleaning and maintenance
Correct maintenance extends the product's lifespan and ensures hygiene.
 

• Daily cleaning: Rinse the razor thoroughly after use. Possibly open the head slightly to rinse inside. Ensure it can dry completely between uses.
• ​​​​​​​Deep cleaning: If limescale deposits or stuck dirt occur, the razor can be soaked in a solution of 1 part vinegar and 2 parts water for a maximum of 10 minutes. Afterwards, scrub gently with a soft toothbrush and mild dish soap.